In message: [linux-yocto][linux-yocto v6.6/standard/ti-sdk-6.6/ti-soc] ti-j7xxx 
kernel part to align TI SDK v6.6 kernel tag 10.00.08
on 23/08/2024 Xulin Sun wrote:

> Hi Bruce,
> 
> Could you please help to merge below patches to the branch
> "v6.6/standard/ti-sdk-6.6/ti-soc".

merged.

Bruce

> 
> 
> The following changes since commit 33d0bfe96eff1343b93735dd765cf44ab6b55a73:
> 
>   Merge branch 'v6.6/standard/base' into v6.6/standard/ti-sdk-6.6/ti-soc
> (2024-07-28 16:25:05 -0400)
> 
> are available in the Git repository at:
> 
>    https://github.com/xulinsun/ti-j72x v6.6/standard/ti-sdk-6.6/ti-soc
> 
> for you to fetch changes up to 964e656e7f7622263f32d5ff1a0ff2d271f24bd1:
> 
>   remoteproc: k3-dsp: use local reset for C7xv dsps on AM62A (2024-08-23
> 15:00:11 +0800)
> 
> ----------------------------------------------------------------
> Andrew Davis (14):
>       mailbox: omap: Remove unused omap_mbox_{enable,disable}_irq()
> functions
>       mailbox: omap: Remove unused omap_mbox_request_channel() function
>       mailbox: omap: Move omap_mbox_irq_t into driver
>       mailbox: omap: Move fifo size check to point of use
>       mailbox: omap: Remove unneeded header omap-mailbox.h
>       mailbox: omap: Remove device class
>       mailbox: omap: Use devm_pm_runtime_enable() helper
>       mailbox: omap: Merge mailbox child node setup loops
>       mailbox: omap: Use function local struct mbox_controller
>       mailbox: omap: Use mbox_controller channel list directly
>       mailbox: omap: Remove mbox_chan_to_omap_mbox()
>       mailbox: omap: Reverse FIFO busy check logic
>       mailbox: omap: Remove kernel FIFO message queuing
>       mailbox: omap: Fix mailbox interrupt sharing
> 
> Beleswar Padhi (1):
>       arm64: dts: ti: k3-j722s-main: Change timer nodes status to reserved
> 
> Bhavya Kapoor (2):
>       arm64: dts: ti: k3-j721s2-som-p0: Update mux-controller node name
>       arm64: dts: ti: k3-j7200-som-p0: Update mux-controller node name
> 
> Brandon Brnich (9):
>       media: chips-media: wave5: Add Support for Frequency Points
>       arm64: dts: ti: k3-j784s4-main: Add OPP table to the VPU node
>       arm64: dts: ti: k3-j721s2-main: Add OPP table to the VPU node
>       arm64: dts: ti: k3-am62p-main: Add OPP table to the VPU node
>       arm64: dts: ti: k3-am62a-main: Add OPP table to the VPU codec node
>       media: chips-media: wave5: Add support for dmabuf import
>       HACK: media: chips-media: wave5: Fix dmabuf import null pointer
> deferenece
>       media: imagination: vxe-vxd: encoder: Fix kmalloc Alignment Issues
>       media: chips-media: wave5: Fix v4l2-compliance issues
> 
> Darren Etheridge (2):
>       media: img: vxe-vxd: fix incorrect allocation sizes
>       media: img: vxe-vxd: fix incomplete decoder initialization
> 
> Devarsh Thakkar (4):
>       drm/tidss: Fix warnings on error prints
>       arm64: dts: ti: am62p: Build device-tree blob for display sharing
> use-case
>       arm64: dts: ti: k3-am62p: Update licensing info in dss sharing overlay
>       arm64: dts: ti: k3-am62p: Fix compilation warning on missing
> interrupt-parent
> 
> Guillaume La Roque (3):
>       net: ti: icssg-prueth: add missing deps
>       net: ethernet: ti: fix duplicate entry for k3-cppi-desc-pool.o
>       media: chips-media: wave5: initialize variable
> 
> Hari Nagalla (8):
>       arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
>       remoteproc: k3-r5: Introduce PM suspend/resume handlers
>       remoteproc: k3-m4: Introduce PM suspend/resume handlers
>       arm64: dts: ti: k3-am62a7-sk: HACK: Reduce mailbox fifos
>       dt-bindings: remoteproc: k3-dsp: Add C7xv dsp variant for J722S
>       remoteproc: k3-dsp: add compatible string for j722 c7xv DSP
>       arm64: dts: ti: k3-j722s2-main: update compatible string for c7xv dsps
>       remoteproc: k3-dsp: use local reset for C7xv dsps on AM62A
> 
> Jackson.lee (1):
>       media: chips-media: wave5: Fix GOP size not being set
> 
> Jai Luthra (1):
>       media: i2c: ds90ub960: Fix VC mapping when ports skipped
> 
> Kevin Hilman (1):
>       pmdomain: ti_sci: handle wake IRQs for IO daisy chain wakeups
> 
> Logan Bristol (1):
>       arm64: dts: ti: Add devicetree for AM62x minimal configuration
> 
> MD Danish Anwar (1):
>       net: ti: icssg_prueth: Enable 10M Link issue quirk for AM64x
> 
> Manorit Chawdhry (2):
>       arm64: dts: ti: Introduce J742S2 SoC and EVM
>       arm64: dts: ti: k3-j742s2: Fix the number of VPUs
> 
> Markus Schneider-Pargmann (2):
>       remoteproc: k3-r5: Move suspend to suspend_late
>       remoteproc: k3-m4: Move suspend to suspend_late
> 
> Prasanth Babu Mantena (5):
>       spi: spi-cadence-quadspi: Return EPROBE_DEFER on dma failure
>       mtd: spinand: Add Status register check after Page load
>       arm64: dts: ti: k3-j721s2: Revert frequency settings for OSPI NAND
>       arm64: dts: ti: k3-j784s4: Revert frequency settings for OSPI NAND
>       Revert "arm64: dts: ti: k3-j722s: Update Nand node for Octal SDR"
> 
> Rahul T R (1):
>       remoteproc: core: Make DMA-BUF attachment interface thread safe
> 
> Santhosh Kumar K (13):
>       spi: cadence-quadspi: Tune PHY for SDR without DQS
>       spi: cadence-quadspi: Enable SPI_TX_QUAD
>       mtd: spinand: Call do_calibration when SPI NAND probes
>       mtd: spinand: winbond: Add support for W25N01JW SPI NAND flash
>       mtd: spinand: Add late_init for W25N01JW and W35N01JW
>       mtd: spinand: winbond: Change Dummy Cycles for OCTALIO_OP
>       arm64: dts: ti: k3-am62-lp-sk: Modify frequencies according to PHY
>       arm64: dts: ti: k3-am62a: Modify frequencies according to PHY
>       spi: cadence-quadspi: Move cqspi_phy_enable() and
> cqspi_readdata_capture()
>       spi: cadence-quadspi: Enable PHY for data writes
>       spi: cadence-quadspi: Define cqspi_phy_set_dll_master
>       spi: cadence-quadspi: Store phy_setting in flash private data
>       spi: cadence-quadspi: Move restore_context to runtime_resume
> 
> Siddharth Vadapalli (2):
>       dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
>       arm64: dts: ti: k3-am62p: use eFuse MAC Address for CPSW3G Port 1
> 
> Udit Kumar (1):
>       remoteproc: k3-r5: Delay notification of wakeup event
> 
> Uwe Kleine-König (1):
>       mailbox: omap: Convert to platform remove callback returning void
> 
> Vibhore Vardhan (4):
>       firmware: ti_sci: recover properly when firmware NAKs
>       mailbox: omap: Move suspend to suspend_late
>       firmware: ti_sci: Call prepare_sleep in suspend
>       arm64: dts: ti: k3-am62a7-sk: Add alias for RTC
> 
> Vignesh Raghavendra (1):
>       spi: spi-cadence-quadspi: Fix sporadic resume failures
> 
>  Documentation/devicetree/bindings/mfd/syscon.yaml |   1 +
>  Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml |   3 +
>  arch/arm64/boot/dts/ti/Makefile |   8 ++-
>  arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts |   5 +-
>  arch/arm64/boot/dts/ti/k3-am625-minimal.dts |  89 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi |  21 +++++-
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts |  14 +++-
>  arch/arm64/boot/dts/ti/k3-am62p-main.dtsi |  24 +++++++
>  arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi |   5 ++
>  arch/arm64/boot/dts/ti/k3-am62p5-sk-dss-shared-mode.dtso |   5 +-
>  arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi |   4 +-
>  arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi |  23 ++++++
>  arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi |   2 +-
>  arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi |   8 +--
>  arch/arm64/boot/dts/ti/k3-j722s-evm.dts |  16 ++++-
>  arch/arm64/boot/dts/ti/k3-j722s-main.dtsi |   4 +-
>  arch/arm64/boot/dts/ti/k3-j722s.dtsi |   3 -
>  arch/arm64/boot/dts/ti/k3-j742s2-evm.dts |  22 ++++++
>  arch/arm64/boot/dts/ti/k3-j742s2-main.dtsi |  45 ++++++++++++
>  arch/arm64/boot/dts/ti/k3-j742s2.dtsi |  18 +++++
>  arch/arm64/boot/dts/ti/k3-j784s4-evm.dts |   4 +-
>  arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi |  48 +++++++++++++
>  arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi |   2 +-
>  drivers/firmware/ti_sci.c |  17 +++--
>  drivers/gpu/drm/tidss/tidss_drv.c |   4 +-
>  drivers/mailbox/Kconfig |   9 ---
>  drivers/mailbox/omap-mailbox.c | 524 
> +++++++++++++++++++++++++++++------------------------------------------------------------------------------------------------------------
>  drivers/media/i2c/ds90ub960.c |   7 +-
>  drivers/media/platform/chips-media/wave5/wave5-helper.c |  67
> ++++++++++++++++++
>  drivers/media/platform/chips-media/wave5/wave5-helper.h |   6 ++
>  drivers/media/platform/chips-media/wave5/wave5-hw.c |   3 +
>  drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c | 207
> ++++++++++++++++++++++++++++++++++++++++++++----------
>  drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c |  16 +++--
>  drivers/media/platform/chips-media/wave5/wave5-vpu.c |   6 ++
>  drivers/media/platform/chips-media/wave5/wave5-vpuapi.h |  21 ++++++
>  drivers/media/platform/imagination/vxe-vxd/common/work_queue.c |   4 +-
>  drivers/media/platform/imagination/vxe-vxd/decoder/vxd_core.c |   2 +-
>  drivers/media/platform/imagination/vxe-vxd/decoder/vxd_v4l2.c |  10 +++
>  drivers/media/platform/imagination/vxe-vxd/encoder/topaz_api.c |   2 +-
>  drivers/media/platform/imagination/vxe-vxd/encoder/topaz_device.c |   2 +-
>  drivers/mtd/nand/spi/core.c |  53 ++++++++++++--
>  drivers/mtd/nand/spi/winbond.c | 130 +++++++++++++++++++++++++++++++++-
>  drivers/net/ethernet/ti/Kconfig |   1 +
>  drivers/net/ethernet/ti/Makefile |   2 +-
>  drivers/net/ethernet/ti/icssg/icssg_prueth.c |   1 +
>  drivers/pmdomain/ti/ti_sci_pm_domains.c |   9 +++
>  drivers/remoteproc/remoteproc_core.c |  11 ++-
>  drivers/remoteproc/ti_k3_dsp_remoteproc.c |   8 +++
>  drivers/remoteproc/ti_k3_m4_remoteproc.c | 173
> +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/remoteproc/ti_k3_r5_remoteproc.c | 208
> ++++++++++++++++++++++++++++++++++++++++++++++++++++--
>  drivers/spi/spi-cadence-quadspi.c | 462 
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------
>  include/linux/mtd/spinand.h |   9 +++
>  include/linux/omap-mailbox.h |  13 ----
>  53 files changed, 1744 insertions(+), 617 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am625-minimal.dts
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j742s2-main.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j742s2.dtsi
> 
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#14318): 
https://lists.yoctoproject.org/g/linux-yocto/message/14318
Mute This Topic: https://lists.yoctoproject.org/mt/108052409/21656
Group Owner: linux-yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/unsub 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to