commit 457e84bf2d49("drivers: net: phy: Multiple fixes for stability")
is from sdk kernel, it enables the WOL feature for RTL 8211F PHY. But
the source code is messed up during merging upstream code, so fix
building issue by recovering sdk code.Signed-off-by: Meng Li <[email protected]> --- drivers/net/phy/realtek.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index e65d6ed9b56c..96d463b5fff0 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -545,6 +545,7 @@ static int rtl8211f_config_init(struct phy_device *phydev) ERR_PTR(ret)); return ret; } + } ret = phy_modify_paged_changed(phydev, RTL8211F_WOL_MAC_PAGE, RTL8211F_WOL_REG_MAC_WORD_0, 0x0, phydev->attached_dev->dev_addr[MAC_ADDRESS_BYTE_0] | @@ -567,10 +568,7 @@ static int rtl8211f_config_init(struct phy_device *phydev) if (ret < 0) return ret; - clk_disable_unprepare(priv->clk); - } - - return ret; + return genphy_soft_reset(phydev); } static int rtl821x_resume(struct phy_device *phydev) @@ -1134,7 +1132,9 @@ static struct phy_driver realtek_drvs[] = { .read_status = rtlgen_read_status, .config_intr = &rtl8211f_config_intr, .handle_interrupt = rtl8211f_handle_interrupt, - .suspend = rtl821x_suspend, + .get_wol = &rtl8211f_get_wol, + .set_wol = &rtl8211f_set_wol, + .suspend = genphy_suspend, .resume = rtl821x_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, -- 2.34.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15967): https://lists.yoctoproject.org/g/linux-yocto/message/15967 Mute This Topic: https://lists.yoctoproject.org/mt/116271226/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
