On Wed, 2013-12-11 at 12:19 +0800, [email protected] wrote: > From: "Chang, Rebecca Swee Fun" <[email protected]> > > [backport of commit 6d1f56aa5149082bb0ce6dd8d47e51a1013a206d]
This one should be applied to standard/base as it is an exact backport of an upstream commit. No need for this one to be sitting in a feature patch series. This will be lower maintenance in the long run. -- Darren > > Signed-off-by: Chang, Rebecca Swee Fun <[email protected]> > --- > ...spi-remove-depends-on-CONFIG_EXPERIMENTAL.patch | 102 > ++++++++++++++++++++ > 1 file changed, 102 insertions(+) > create mode 100644 > meta/cfg/kernel-cache/features/valleyisland-io/0007-drivers-spi-remove-depends-on-CONFIG_EXPERIMENTAL.patch > > diff --git > a/meta/cfg/kernel-cache/features/valleyisland-io/0007-drivers-spi-remove-depends-on-CONFIG_EXPERIMENTAL.patch > > b/meta/cfg/kernel-cache/features/valleyisland-io/0007-drivers-spi-remove-depends-on-CONFIG_EXPERIMENTAL.patch > new file mode 100644 > index 0000000..73cf4f0 > --- /dev/null > +++ > b/meta/cfg/kernel-cache/features/valleyisland-io/0007-drivers-spi-remove-depends-on-CONFIG_EXPERIMENTAL.patch > @@ -0,0 +1,102 @@ > +drivers/spi: remove depends on CONFIG_EXPERIMENTAL > + > +The CONFIG_EXPERIMENTAL config item has not carried much meaning for a > +while now and is almost always enabled by default. As agreed during the > +Linux kernel summit, remove it from any "depends on" lines in Kconfigs. > + > +CC: Grant Likely <[email protected]> > +Signed-off-by: Kees Cook <[email protected]> > +Signed-off-by: Greg Kroah-Hartman <[email protected]> > +--- > + drivers/spi/Kconfig | 19 +++++++++---------- > + 1 file changed, 9 insertions(+), 10 deletions(-) > + > +diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > +index 2e188e1..3105ea2 100644 > +--- a/drivers/spi/Kconfig > ++++ b/drivers/spi/Kconfig > +@@ -88,7 +88,7 @@ config SPI_BFIN_SPORT > + > + config SPI_AU1550 > + tristate "Au1550/Au1200/Au1300 SPI Controller" > +- depends on MIPS_ALCHEMY && EXPERIMENTAL > ++ depends on MIPS_ALCHEMY > + select SPI_BITBANG > + help > + If you say yes to this option, support will be included for the > +@@ -188,7 +188,7 @@ config SPI_IMX > + > + config SPI_LM70_LLP > + tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" > +- depends on PARPORT && EXPERIMENTAL > ++ depends on PARPORT > + select SPI_BITBANG > + help > + This driver supports the NS LM70 LLP Evaluation Board, > +@@ -204,7 +204,7 @@ config SPI_MPC52xx > + > + config SPI_MPC52xx_PSC > + tristate "Freescale MPC52xx PSC SPI controller" > +- depends on PPC_MPC52xx && EXPERIMENTAL > ++ depends on PPC_MPC52xx > + help > + This enables using the Freescale MPC52xx Programmable Serial > + Controller in master SPI mode. > +@@ -273,8 +273,8 @@ config SPI_OMAP_100K > + OMAP SPI 100K master controller for omap7xx boards. > + > + config SPI_ORION > +- tristate "Orion SPI master (EXPERIMENTAL)" > +- depends on PLAT_ORION && EXPERIMENTAL > ++ tristate "Orion SPI master" > ++ depends on PLAT_ORION > + help > + This enables using the SPI master controller on the Orion chips. > + > +@@ -299,7 +299,7 @@ config SPI_PPC4xx > + > + config SPI_PXA2XX > + tristate "PXA2xx SSP SPI master" > +- depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL > ++ depends on (ARCH_PXA || (X86_32 && PCI)) > + select PXA_SSP if ARCH_PXA > + help > + This enables using a PXA2xx or Sodaville SSP port as a SPI master > +@@ -317,7 +317,7 @@ config SPI_RSPI > + > + config SPI_S3C24XX > + tristate "Samsung S3C24XX series SPI" > +- depends on ARCH_S3C24XX && EXPERIMENTAL > ++ depends on ARCH_S3C24XX > + select SPI_BITBANG > + help > + SPI driver for Samsung S3C24XX series ARM SoCs > +@@ -432,7 +432,7 @@ config SPI_XCOMM > + > + config SPI_XILINX > + tristate "Xilinx SPI controller common module" > +- depends on HAS_IOMEM && EXPERIMENTAL > ++ depends on HAS_IOMEM > + select SPI_BITBANG > + help > + This exposes the SPI controller IP from the Xilinx EDK. > +@@ -444,7 +444,7 @@ config SPI_XILINX > + > + config SPI_NUC900 > + tristate "Nuvoton NUC900 series SPI" > +- depends on ARCH_W90X900 && EXPERIMENTAL > ++ depends on ARCH_W90X900 > + select SPI_BITBANG > + help > + SPI driver for Nuvoton NUC900 series ARM SoCs > +@@ -478,7 +478,6 @@ comment "SPI Protocol Masters" > + > + config SPI_SPIDEV > + tristate "User mode SPI device driver support" > +- depends on EXPERIMENTAL > + help > + This supports user mode SPI protocol drivers. > + > +-- > +1.7.10.4 > + -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel _______________________________________________ linux-yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/linux-yocto
