On 14-04-07 11:17 AM, [email protected] wrote:
From: Chang Rebecca Swee Fun <[email protected]>
Hi all,
Adding Darren (just in case he missed this).
Here is a request to create feature branch to host Valley Island PCI
enumerated LPSS I/O device drivers. We expect the patch series to be
removed over time. This will give us time to stage a working code
while we are working on up-stream commits to mainline and eventually
back-port them into LTS/LTSI. As per previous internal discussion, we
think that feature branch is a right approach for ISG.
The content looks reasonable to me, there's a mix of mainline backports
and new patches, but nothing jumps out as "not belonging" on the
feature branch.
Some of the mainline backports would probably be better merged to
standard/base, and made available to all boards, but I won't insist
(unless Darren wants to insist instead).
This new branch is named: isg-1.0 with -1.0 suffix as the initial
version of this feature branch. This feature branch was branched out
from linux-yocto-3.10 standard/base at the commit:
Did we want to give it at least part of a name that indicates the
purpose as well ? i.e. isg-io-1.0.
Cheers,
Bruce
3e0a296fae952d8d93eb0f96566bf6d4a978c8ee
minnowboard-keys: Bind MinnowBoard buttons to arrow keys
This branch was built tested to ensure no merge issues during build time.
The PCI enumerated I/O drivers are sanity tested by checking "dmesg",
"lspci -k" and "lsmod".
Please help to create a new branch named isg-1.0 in linux-yocto-3.10
and pull the entire patch series into the feature branch.
Thanks.
Rebecca
The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee:
minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12
00:08:25 -0500)
are available in the git repository at:
git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0
http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/isg-1.0
Alan Stern (1):
usb: gadget: don't fail when DMA isn't present
Chang, Rebecca Swee Fun (1):
i2c: i801: Enable BYT SMBUS support
Chew, Chiau Ee (14):
x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
x86/byt: enable board file for BYT LPSS PCI mode
dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading
sequence
dma: dw: Implement suspend/resume callbacks
serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate
i2c: designware-pci: Add support for Intel BayTrail LPSS I2C
i2c: designware-pcidrv: Add 10-bit addressing mode functionality
i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value
spi/pxa2xx-pci: Add support for Intel BYT SPI
spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds
sdhc: acpi: Fix SDCARD card detection failure
pwm: lpss: Enable BYT PCI mode PWM
pwm: lpss: Fix base_unit calculation
ACPI / LPSS: Add BYT ACPI mode PWM
Chew, Kean Ho (5):
mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode
pinctrl-baytrail: add function mux checking in gpio pin request
pinctrl-baytrail: unmap interrupt when free the gpio pin
pinctrl-baytrail: enable platform device in the absent of ACPI
enumeration
pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on
non-ACPI system
Felipe Balbi (1):
usb: gadget: udc-core: move sysfs_notify() to a workqueue
H Hartley Sweeten (1):
pwm: Add sysfs interface
Heikki Krogerus (2):
serial: 8250: don't change the fifo trigger level when using dma
serial: 8250_pci: add support for Intel BayTrail
Maurice Petallo (3):
usb: dwc3: pci: Enable/disable ulpi phy refclk
x86/byt: Fix device name string for clkdev registration
mmc: sdhci: Fix continuous warning prints in ISR if shared interrupt
Mika Westerberg (1):
pwm: add support for Intel Low Power Subsystem PWM
Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++
Documentation/pwm.txt | 37 +++
arch/x86/Kconfig | 11 +-
arch/x86/platform/Makefile | 3 +
arch/x86/platform/byt/Makefile | 1 +
arch/x86/platform/byt/byt-board.c | 84 +++++++
drivers/acpi/acpi_lpss.c | 11 +
drivers/dma/Makefile | 2 +-
drivers/dma/dw/pci.c | 36 +++
drivers/i2c/busses/Makefile | 2 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +++++++++-
drivers/i2c/busses/i2c-i801.c | 2 +
drivers/mmc/host/sdhci-acpi.c | 7 +-
drivers/mmc/host/sdhci-pci.c | 3 +-
drivers/mmc/host/sdhci.c | 17 +-
drivers/pinctrl/Kconfig | 19 +-
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++
drivers/pinctrl/pinctrl-baytrail.c | 76 +++++-
drivers/pwm/Kconfig | 21 ++
drivers/pwm/Makefile | 3 +
drivers/pwm/core.c | 25 +-
drivers/pwm/pwm-lpss-pci.c | 118 ++++++++++
drivers/pwm/pwm-lpss.c | 186 +++++++++++++++
drivers/pwm/pwm-lpss.h | 19 ++
drivers/pwm/sysfs.c | 352 ++++++++++++++++++++++++++++
drivers/spi/Kconfig | 5 +-
drivers/spi/spi-pxa2xx-dma.c | 2 +-
drivers/spi/spi-pxa2xx-pci.c | 85 +++++--
drivers/tty/serial/8250/8250_core.c | 2 +-
drivers/tty/serial/8250/8250_dw.c | 43 ++++
drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++
drivers/usb/dwc3/dwc3-pci.c | 23 ++
drivers/usb/gadget/udc-core.c | 18 +-
include/linux/mmc/sdhci.h | 2 +
include/linux/pinctrl/pinctrl-byt.h | 16 ++
include/linux/pwm.h | 29 ++-
include/linux/usb/gadget.h | 4 +
38 files changed, 1731 insertions(+), 43 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-pwm
create mode 100644 arch/x86/platform/byt/Makefile
create mode 100644 arch/x86/platform/byt/byt-board.c
create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
create mode 100644 drivers/pwm/pwm-lpss-pci.c
create mode 100644 drivers/pwm/pwm-lpss.c
create mode 100644 drivers/pwm/pwm-lpss.h
create mode 100644 drivers/pwm/sysfs.c
create mode 100644 include/linux/pinctrl/pinctrl-byt.h
--
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto
