Hi Bruce, I have run a build test on the latest commits checked-in. The feature branch was not merge in during build time. I think that the feature branch should be branching out from commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee:minnowboard-keys: Bind MinnowBoard buttons to arrow keys instead of the HEAD of standard/base.
As per my observation during my implementation of feature branch, the feature branch should always branch out from an older version of standard/base, not the HEAD. Can you please help to rebase the feature branch? The feature branch should look exactly like the branch that I've pushed to the contrib. Thank you. Rebecca > -----Original Message----- > From: Bruce Ashfield [mailto:[email protected]] > Sent: 23 May, 2014 10:20 AM > To: Chang, Rebecca Swee Fun; [email protected] > Subject: Re: [linux-yocto] [PATCH 00/24] [linux-yocto-3.10] [Scenerio 1] > Enable feature branch for Valley Island features > > On 2014-05-22, 6:09 AM, [email protected] wrote: > > From: Chang Rebecca Swee Fun <[email protected]> > > > > Hi all, > > > > This is the scenerio 1 that Boon Leong mentioned in the Feature Branch > > planning email thread. This will be the feature branch that consists > > of all patches that are queuing into 3.10 LTS/LTSI and also the so > > called "staging patches". > > > > Whenever the LTS/LTSI patches got merged into standard/base in future, > > that will break this feature branch. I will be rebase this feature > > branch to fix build breakage. > > > > This feature branch was implemented locally and built tested. Feature > > branch was able to merge with standard/base and built successfully. I > > have also run some sanity test to check the drivers condition. All > > tests are done on Bayley Bay CRB and Bakersport CRB. Valley Island Dev Kit > was boot tested. > > > > If this is the scenerio that you are looking for, please help to > > create a new feature branch named: valleyisland-io-1.0 in linux-yocto-3.10. > > I've gone with this option. I created a new branch called > "valleyisland-io-1.0" > from the latest standard/base and applied this patch series. > > The new content is now pushed to the repos. > > Let me know if you see anything wrong with the merge. > > Bruce > > > > > Thanks. > > Rebecca > > > > The following changes since commit > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: > > > > minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > (2014-02-12 00:08:25 -0500) > > > > are available in the git repository at: > > > > git://git.yoctoproject.org/linux-yocto-contrib rebeccas/valleyisland-io- > features-branch > > > > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc > > as/valleyisland-io-features-branch > > > > Adrian Hunter (1): > > mmc: sdhci: Allow for irq being shared > > > > Alan Stern (1): > > usb: gadget: don't fail when DMA isn't present > > > > Chang Rebecca Swee Fun (1): > > x86/byt: enable board file for Baytrail LPSS PCI mode > > > > Chew, Chiau Ee (8): > > x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS > > serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate > > spi/pxa2xx-pci: Add support for Intel BYT SPI > > spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds > > dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. > > i2c: designware-pci: add 10-bit addressing mode functionality for BYT > > I2C > > i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value > > ACPI / LPSS: Add Intel BayTrail ACPI mode PWM > > > > Chew, Kean Ho (4): > > pinctrl-baytrail: add function mux checking in gpio pin request > > pinctrl-baytrail: unmap interrupt when free the gpio pin > > pinctrl-baytrail: enable platform device in the absent of ACPI > > enumeration > > pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI > > system > > > > Chew, Kean ho (1): > > i2c: i801: enable Intel BayTrail SMBUS > > > > Felipe Balbi (1): > > usb: gadget: udc-core: move sysfs_notify() to a workqueue > > > > H Hartley Sweeten (1): > > pwm: Add sysfs interface > > > > Heikki Krogerus (2): > > serial: 8250: don't change the fifo trigger level when using dma > > serial: 8250_pci: add support for Intel BayTrail > > > > James Ralston (1): > > i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH > > > > Mika Westerberg (2): > > i2c: designware-pci: Add Baytrail PCI IDs > > pwm: add support for Intel Low Power Subsystem PWM > > > > Seth Heasley (1): > > i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs > > > > Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++ > > Documentation/i2c/busses/i2c-i801 | 3 + > > Documentation/pwm.txt | 37 +++ > > arch/x86/Kconfig | 11 +- > > arch/x86/platform/Makefile | 3 + > > arch/x86/platform/byt/Makefile | 1 + > > arch/x86/platform/byt/byt-board.c | 84 +++++++ > > drivers/acpi/acpi_lpss.c | 11 + > > drivers/dma/dw/pci.c | 33 +++ > > drivers/i2c/busses/Kconfig | 3 + > > drivers/i2c/busses/i2c-designware-pcidrv.c | 66 +++++- > > drivers/i2c/busses/i2c-i801.c | 9 + > > drivers/mmc/host/sdhci.c | 4 +- > > drivers/pinctrl/Kconfig | 19 +- > > drivers/pinctrl/Makefile | 1 + > > drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++ > > drivers/pinctrl/pinctrl-baytrail.c | 101 ++++++++- > > drivers/pwm/Kconfig | 14 ++ > > drivers/pwm/Makefile | 2 + > > drivers/pwm/core.c | 25 +- > > drivers/pwm/pwm-lpss.c | 183 +++++++++++++++ > > drivers/pwm/sysfs.c | 352 > +++++++++++++++++++++++++++++ > > drivers/spi/Kconfig | 5 +- > > drivers/spi/spi-pxa2xx-dma.c | 2 +- > > drivers/spi/spi-pxa2xx-pci.c | 85 +++++-- > > drivers/tty/serial/8250/8250_core.c | 2 +- > > drivers/tty/serial/8250/8250_dw.c | 43 ++++ > > drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++ > > drivers/usb/gadget/udc-core.c | 18 +- > > include/linux/pinctrl/pinctrl-byt.h | 16 ++ > > include/linux/pwm.h | 29 ++- > > include/linux/usb/gadget.h | 4 + > > 32 files changed, 1506 insertions(+), 43 deletions(-) > > create mode 100644 Documentation/ABI/testing/sysfs-class-pwm > > create mode 100644 arch/x86/platform/byt/Makefile > > create mode 100644 arch/x86/platform/byt/byt-board.c > > create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c > > create mode 100644 drivers/pwm/pwm-lpss.c > > create mode 100644 drivers/pwm/sysfs.c > > create mode 100644 include/linux/pinctrl/pinctrl-byt.h > > -- _______________________________________________ linux-yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/linux-yocto
