Thanks! I will try the local build first. Rebecca
> -----Original Message----- > From: Bruce Ashfield [mailto:[email protected]] > Sent: 03 September, 2014 3:17 AM > To: Chang, Rebecca Swee Fun; [email protected] > Subject: Re: [linux-yocto] [PATCH 00/28][3.10] Baytrail LPSS I/O feature > backport > > On 2014-08-28, 6:51 AM, [email protected] wrote: > > From: Chang Rebecca Swee Fun <[email protected]> > > > > Hi all, > > > > Here is a series of patches that I've cherry-picked from mainline > > kernel into linux-yocto-3.10. These patches are Baytrail PCI mode LPSS I/O > features. > > The patches consists of PWM, DMA, UART, USB device mode, I2C, and SPI > > device drivers. > > > > These patches was in valleyisland-io-1.0 currently. I will then rebase > > the valleyisland-io feature branch to reduce the maintenance effort in > > feature branch. > > > > To help you in review process, one of the patch is actually pending to > > mainline and it is now queuing in linux-next git repo. > > The patch that I mentioned is: > > e4f08d7 spi/pxa2xx-pci: Add common clock framework support in PCI glue > > layer while the other patches are confirmed picked from mainline. > > > > This series of patches had been built and tested on Bakersports, and > > MinnowBoard MAX. > > > > Please review the series of patches and merge them into > > linux-yocto-3.10 standard/base branch for feature enabling purposes. > > I've merged these patches into standard/base, and pushed the results to the > linux-yocto-3.10 tree. > > Update your SRCREVs locally to take them for a spin! > > Bruce > > > > > Thanks in advance > > > > Rebecca > > > > The following changes since commit > aa677a2d02677ec92d59a8c36d001cf2f5cf3260: > > > > usb/core: fix merge issue (2014-06-16 12:24:47 -0400) > > > > are available in the git repository at: > > > > git://git.yoctoproject.org/linux-yocto-contrib > > rebeccas/baytrail-backport- > features > > > > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc > > as/baytrail-backport-features > > > > Adrian Hunter (1): > > mmc: sdhci: Allow for irq being shared > > > > Alan Cox (1): > > pwm: lpss: Add support for PCI devices > > > > Alan Stern (1): > > usb: gadget: don't fail when DMA isn't present > > > > Andy Shevchenko (2): > > dmaengine: dw: introduce dwc_dostart_first_queued() helper > > dmaengine: dw: don't perform DMA when dmaengine_submit is called > > > > Antonio Ospite (1): > > spi/pxa2xx: fix runtime PM enabling order > > > > Chew, Chiau Ee (8): > > ACPI / LPSS: Add Intel BayTrail ACPI mode PWM > > dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. > > i2c: designware-pci: add 10-bit addressing mode functionality for BYT > > I2C > > i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value > > spi/pxa2xx-pci: Add PCI mode support for BayTrail LPSS SPI > > spi/pxa2xx: change default supported DMA burst size to 1 > > spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS > > SPI > > spi/pxa2xx-pci: Add common clock framework support in PCI glue > > layer > > > > Felipe Balbi (1): > > usb: gadget: udc-core: move sysfs_notify() to a workqueue > > > > H Hartley Sweeten (1): > > pwm: Add sysfs interface > > > > Heikki Krogerus (3): > > serial: 8250_dma: check the result of TX buffer mapping > > serial: 8250: don't change the fifo trigger level when using dma > > serial: 8250_pci: add support for Intel BayTrail > > > > Jingoo Han (2): > > spi: remove DEFINE_PCI_DEVICE_TABLE macro > > spi: pxa2xx: remove unnecessary OOM messages > > > > Loic Poulain (1): > > 8250_dw: Support all baudrates on baytrail > > > > Maurice Petallo (2): > > mmc: sdhci: Preset value not supported in Baytrail eMMC > > mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC > > Controller > > > > Mika Westerberg (3): > > pwm: add support for Intel Low Power Subsystem PWM > > i2c: designware-pci: Add Baytrail PCI IDs > > spi/pxa2xx: Prevent DMA from transferring too many bytes > > > > Thierry Reding (1): > > pwm: lpss: Fix const qualifier and sparse warnings > > > > Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++ > > Documentation/pwm.txt | 37 +++ > > drivers/acpi/acpi_lpss.c | 11 + > > drivers/dma/TODO | 1 - > > drivers/dma/dw/core.c | 38 ++-- > > drivers/dma/dw/pci.c | 33 +++ > > drivers/i2c/busses/i2c-designware-pcidrv.c | 66 +++++- > > drivers/mmc/host/sdhci-acpi.c | 4 +- > > drivers/mmc/host/sdhci-pci.c | 3 +- > > drivers/mmc/host/sdhci.c | 4 +- > > drivers/pwm/Kconfig | 14 ++ > > drivers/pwm/Makefile | 2 + > > drivers/pwm/core.c | 25 +- > > drivers/pwm/pwm-lpss.c | 282 +++++++++++++++++++++++ > > drivers/pwm/sysfs.c | 352 > > +++++++++++++++++++++++++++++ > > drivers/spi/Kconfig | 2 +- > > drivers/spi/spi-dw-pci.c | 2 +- > > drivers/spi/spi-pxa2xx-dma.c | 18 +- > > drivers/spi/spi-pxa2xx-pci.c | 97 ++++++-- > > drivers/spi/spi-pxa2xx.c | 28 ++- > > drivers/spi/spi-topcliff-pch.c | 2 +- > > drivers/tty/serial/8250/8250_core.c | 2 +- > > drivers/tty/serial/8250/8250_dma.c | 17 +- > > drivers/tty/serial/8250/8250_dw.c | 81 ++++++- > > drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++ > > drivers/usb/gadget/udc-core.c | 18 +- > > include/linux/pwm.h | 29 ++- > > include/linux/usb/gadget.h | 4 + > > 28 files changed, 1297 insertions(+), 99 deletions(-) > > create mode 100644 Documentation/ABI/testing/sysfs-class-pwm > > create mode 100644 drivers/pwm/pwm-lpss.c > > create mode 100644 drivers/pwm/sysfs.c > > -- _______________________________________________ linux-yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/linux-yocto
