From: John Jacques <[email protected]> This simulation device tree supports virtio and mmc.
Signed-off-by: John Jacques <[email protected]> --- arch/arm/boot/dts/axm5516-sim-common.dts | 131 +++++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) create mode 100644 arch/arm/boot/dts/axm5516-sim-common.dts diff --git a/arch/arm/boot/dts/axm5516-sim-common.dts b/arch/arm/boot/dts/axm5516-sim-common.dts new file mode 100644 index 0000000..abbd00a --- /dev/null +++ b/arch/arm/boot/dts/axm5516-sim-common.dts @@ -0,0 +1,131 @@ +/* + * arch/arm/boot/dts/axm5516-sim.dts + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x00000000 0x00400000; + +/include/ "axm55xx.dtsi" +/include/ "axm5516-cpus.dtsi" + +/ { + model = "Simulation Platform AXM5500"; + compatible = "lsi,axm5500-sim", "lsi,axm5500"; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + cpu { + frequency = <1400000000>; + }; + + peripheral { + frequency = <400000000>; + }; + + emmc { + frequency = <25000000>; + }; + }; + + sim { + compatible = "arm,amba-bus", "simple-bus"; + device_type = "soc"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + ranges; + + mmci@020101E0000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x20 0x101E0000 0x00 0x1000>; + interrupts = <0 222 4>, + <0 223 4>; + }; + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x20 0x101f0000 0 0x10000>; + interrupts = <0 223 4>; + }; + ethernet@201100000000 { + compatible = "smsc,lan91c111"; + device_type = "network"; + reg = <0x20 0x11000000 0 0x10000>; + interrupts = <0 1 4>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + }; + }; +}; + +&mtc { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&spics { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; -- 1.8.1.4 -- _______________________________________________ linux-yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/linux-yocto
