From: Jonas Svennebring <jonas.svennebr...@gmail.com>
commit fa637bf0595ee1796d728a0d33b6b7fff12e1f3d upstream
Because CCN's cycle counter always runs, it will generate
an interrupt on overflow even if the relevant perf event
was not requested, causing a spurious warning message.
Fixed now by warning on only normal counter unwanted
overflows. Also cleaning the overflow mask at init now,
not to warn on event previously requested by firmware.
Signed-off-by: Pawel Moll <pawel.m...@arm.com>
Signed-off-by: Olof Johansson <o...@lixom.net>
Signed-off-by: Arnd Bergmann <a...@arndb.de>
Signed-off-by: Jonas Svennebring <jonas.svennebr...@gmail.com>
---
drivers/bus/arm-ccn.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 950e039..491bc5b 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -57,6 +57,7 @@
#define CCN_DT_PMCCNTRSR 0x0190
#define CCN_DT_PMOVSR 0x0198
#define CCN_DT_PMOVSR_CLR 0x01a0
+#define CCN_DT_PMOVSR_CLR__MASK 0x1f
#define CCN_DT_PMCR 0x01a8
#define CCN_DT_PMCR__OVFL_INTR_EN (1 << 6)
#define CCN_DT_PMCR__PMU_EN (1 << 0)
@@ -1052,7 +1053,8 @@ static irqreturn_t arm_ccn_pmu_overflow_handler(struct
arm_ccn_dt *dt)
struct perf_event *event = dt->pmu_counters[idx].event;
int overflowed = pmovsr & BIT(idx);
- WARN_ON_ONCE(overflowed && !event);
+ WARN_ON_ONCE(overflowed && !event &&
+ idx != CCN_IDX_PMU_CYCLE_COUNTER);
if (!event || !overflowed)
continue;
@@ -1088,6 +1090,7 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
/* Initialize DT subsystem */
ccn->dt.base = ccn->base + CCN_REGION_SIZE;
spin_lock_init(&ccn->dt.config_lock);
+ writel(CCN_DT_PMOVSR_CLR__MASK, ccn->dt.base + CCN_DT_PMOVSR_CLR);
writel(CCN_DT_CTL__DT_EN, ccn->dt.base + CCN_DT_CTL);
writel(CCN_DT_PMCR__OVFL_INTR_EN | CCN_DT_PMCR__PMU_EN,
ccn->dt.base + CCN_DT_PMCR);
--
1.8.1.4
--
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto
