I've been working with hardware sama5d35-xplained.
I used the at91 tutorial to compile and install yocto distribution on the
target, that's fine.
My next step is to redefine one interface that is custom to my board, I want to
enable the USART2.
I modify the dts file:
"/poky/build-atmel/tmp/work-shared/sama5d3-xplained/kernel-source/arch/arm/boot/dts/at91-sama5d3_xplained.dts"
to add :
usart2: serial@f8020000{
Pinctrl-0 = <&pinctrl_usart2>;
Status = "okay":
};
Maybe I'm just tired, or maybe this is just hard... but the dtb file is not
updated when I run bitbake.
So do I have to manually compile the dts file or is there some way to do it via
"bitbake core-image-minimal" ?
Thanks,
Morgan.
[Description : Sans titre]
Morgan Guillou
Tel :+33 6 87 59 16 28
Batiment Le Kerguelen
7 rue LT De Vaisseau Bourely
56100 Lorient
--
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto
