From: Andy Shevchenko <andriy.shevche...@linux.intel.com>

commit c28d0a843b44f79f71249d5612804c29483b586d upstream.

There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via
ACPI ID INT3492.

Cc: Thierry Reding <thierry.red...@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.red...@gmail.com>
(cherry picked from commit 912b8439041317a0562609ad892eeab9ba2f0cb2)
---
 drivers/pwm/Kconfig       |  2 +-
 drivers/pwm/pwm-pca9685.c | 20 ++++++++++++++++----
 2 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index b1541f4..749198f 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -223,7 +223,7 @@ config PWM_MXS
 
 config PWM_PCA9685
        tristate "NXP PCA9685 PWM driver"
-       depends on OF && I2C
+       depends on I2C
        select REGMAP_I2C
        help
          Generic PWM framework driver for NXP PCA9685 LED controller.
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 34b5c27..8a1bd49 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -18,9 +18,11 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -212,7 +214,6 @@ static const struct regmap_config pca9685_regmap_i2c_config 
= {
 static int pca9685_pwm_probe(struct i2c_client *client,
                                const struct i2c_device_id *id)
 {
-       struct device_node *np = client->dev.of_node;
        struct pca9685 *pca;
        int ret;
        int mode2;
@@ -233,12 +234,12 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 
        regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
 
-       if (of_property_read_bool(np, "invert"))
+       if (device_property_read_bool(&client->dev, "invert"))
                mode2 |= MODE2_INVRT;
        else
                mode2 &= ~MODE2_INVRT;
 
-       if (of_property_read_bool(np, "open-drain"))
+       if (device_property_read_bool(&client->dev, "open-drain"))
                mode2 &= ~MODE2_OUTDRV;
        else
                mode2 |= MODE2_OUTDRV;
@@ -276,17 +277,28 @@ static const struct i2c_device_id pca9685_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, pca9685_id);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id pca9685_acpi_ids[] = {
+       { "INT3492", 0 },
+       { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
+#endif
+
+#ifdef CONFIG_OF
 static const struct of_device_id pca9685_dt_ids[] = {
        { .compatible = "nxp,pca9685-pwm", },
        { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
+#endif
 
 static struct i2c_driver pca9685_i2c_driver = {
        .driver = {
                .name = "pca9685-pwm",
                .owner = THIS_MODULE,
-               .of_match_table = pca9685_dt_ids,
+               .acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
+               .of_match_table = of_match_ptr(pca9685_dt_ids),
        },
        .probe = pca9685_pwm_probe,
        .remove = pca9685_pwm_remove,
-- 
2.5.0

-- 
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to