Signed-off-by: Ismo Puustinen <ismo.puusti...@intel.com>
---
drivers/staging/iio/adc/Kconfig | 13 ++
drivers/staging/iio/adc/Makefile | 1 +
drivers/staging/iio/adc/adc1x8s102.c | 387 +++++++++++++++++++++++++++++++
include/linux/platform_data/adc1x8s102.h | 30 +++
4 files changed, 431 insertions(+)
create mode 100644 drivers/staging/iio/adc/adc1x8s102.c
create mode 100644 include/linux/platform_data/adc1x8s102.h
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index d0016ce..7d295a6 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -115,4 +115,17 @@ config SPEAR_ADC
To compile this driver as a module, choose M here: the
module will be called spear_adc.
+
+config ADC1x8S102
+ tristate "Texas Instruments ADC1x8S102 driver"
+ depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Texas Instruments ADC1x8S102
ADC.
+ Provides direct access via sysfs.
+
+ To compile this driver as a module, choose M here: the module
will
+ be called adc1x8s102
+
endmenu
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index 1c4277d..3fe3880 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_AD7280) += ad7280a.o
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
+obj-$(CONFIG_ADC1x8S102) += adc1x8s102.o
diff --git a/drivers/staging/iio/adc/adc1x8s102.c
b/drivers/staging/iio/adc/adc1x8s102.c
new file mode 100644
index 0000000..52472e2
--- /dev/null
+++ b/drivers/staging/iio/adc/adc1x8s102.c
@@ -0,0 +1,387 @@
+/*
+ * ADC1x8S102 SPI ADC driver
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * This IIO device driver is is designed to work with the following
+ * analog to digital converters from Texas Instruments:
+ * ADC108S102
+ * ADC128S102
+ * The communication with ADC chip is via the SPI bus (mode 3).
+ */
+
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/types.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/platform_data/adc1x8s102.h>
+#include <linux/regulator/consumer.h>
+
+/*
+ * Defining the ADC resolution being 12 bits, we can use the same driver for
+ * both ADC108S102 (10 bits resolution) and ADC128S102 (12 bits resolution)
+ * chips. The ADC108S102 effectively returns a 12-bit result with the 2
+ * least-significant bits unset.
+ */
+#define ADC1x8S102_BITS 12
+#define ADC1x8S102_MAX_CHANNELS 8
+
+/* 16-bit SPI command format:
+ * [15:14] Ignored
+ * [13:11] 3-bit channel address
+ * [10:0] Ignored
+ */
+#define ADC1x8S102_CMD(ch) (((ch) << (8)) << (3))
+
+/*
+ * 16-bit SPI response format:
+ * [15:12] Zeros
+ * [11:0] 12-bit ADC sample (for ADC108S102, [1:0] will always be 0).
+ */
+#define ADC1x8S102_RES_DATA(res) (res & ((1 << ADC1x8S102_BITS) - 1))
+
+struct adc1x8s102_state {
+ struct spi_device *spi;
+ struct regulator *reg;
+ u16 ext_vin;
+ /* SPI transfer used by triggered buffer handler*/
+ struct spi_transfer ring_xfer;
+ /* SPI transfer used by direct scan */
+ struct spi_transfer scan_single_xfer;
+ /* SPI message used by ring_xfer SPI transfer */
+ struct spi_message ring_msg;
+ /* SPI message used by scan_single_xfer SPI transfer */
+ struct spi_message scan_single_msg;
+
+ /* SPI message buffers:
+ * tx_buf: |C0|C1|C2|C3|C4|C5|C6|C7|XX|
+ * rx_buf: |XX|R0|R1|R2|R3|R4|R5|R6|R7|tt|tt|tt|tt|
+ *
+ * tx_buf: 8 channel read commands, plus 1 dummy command
+ * rx_buf: 1 dummy response, 8 channel responses, plus 64-bit timestamp
+ */
+ __be16 rx_buf[13] ____cacheline_aligned;
+ __be16 tx_buf[9];
+
+};
+
+#define ADC1X8S102_V_CHAN(index) \
+ { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = index, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .address = index, \
+ .scan_index = index, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = ADC1x8S102_BITS, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+static const struct iio_chan_spec adc1x8s102_channels[] = {
+ ADC1X8S102_V_CHAN(0),
+ ADC1X8S102_V_CHAN(1),
+ ADC1X8S102_V_CHAN(2),
+ ADC1X8S102_V_CHAN(3),
+ ADC1X8S102_V_CHAN(4),
+ ADC1X8S102_V_CHAN(5),
+ ADC1X8S102_V_CHAN(6),
+ ADC1X8S102_V_CHAN(7),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+
+static int adc1x8s102_update_scan_mode(struct iio_dev *indio_dev,
+ unsigned long const *active_scan_mask)
+{
+ struct adc1x8s102_state *st;
+ int i, j;
+
+ st = iio_priv(indio_dev);
+
+ /* Fill in the first x shorts of tx_buf with the number of channels
+ * enabled for sampling by the triggered buffer
+ */
+ for (i = 0, j = 0; i < ADC1x8S102_MAX_CHANNELS; i++) {
+ if (test_bit(i, active_scan_mask)) {
+ st->tx_buf[j] = cpu_to_be16(ADC1x8S102_CMD(i));
+ j++;
+ }
+ }
+ /* One dummy command added, to clock in the last response */
+ st->tx_buf[j] = 0x00;
+
+ /* build SPI ring message */
+ st->ring_xfer.tx_buf = &st->tx_buf[0];
+ st->ring_xfer.rx_buf = &st->rx_buf[0];
+ st->ring_xfer.len = (j + 1) * sizeof(__be16);
+
+ spi_message_init(&st->ring_msg);
+ spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
+
+ return 0;
+}
+
+
+static irqreturn_t adc1x8s102_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev;
+ struct adc1x8s102_state *st;
+ s64 time_ns = 0;
+ int b_sent;
+
+ indio_dev = pf->indio_dev;
+ st = iio_priv(indio_dev);
+
+ b_sent = spi_sync(st->spi, &st->ring_msg);
+ if (b_sent)
+ goto done;
+ if (indio_dev->scan_timestamp) {
+ time_ns = iio_get_time_ns();
+ memcpy((u8 *)st->rx_buf + st->ring_xfer.len, &time_ns,
+ sizeof(time_ns));
+ }
+
+ /* Skip the dummy response in the first slot */
+ iio_push_to_buffers(indio_dev, (u8 *)&st->rx_buf[1]);
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * returns:
+ * positive (>=0) value => SUCCESS
+ * negative value => FAILURE
+ */
+static int adc1x8s102_scan_direct(struct adc1x8s102_state *st, unsigned ch)
+{
+ int ret;
+
+ if (ch >= ADC1x8S102_MAX_CHANNELS) {
+ dev_err(&st->spi->dev, "AD channel number too big: %u\n", ch);
+ return -1;
+ }
+
+ st->tx_buf[0] = cpu_to_be16(ADC1x8S102_CMD(ch));
+ ret = spi_sync(st->spi, &st->scan_single_msg);
+ if (ret)
+ return ret;
+
+ /* Skip the dummy response in the first slot */
+ return be16_to_cpu(st->rx_buf[1]);
+}
+
+
+/*
+ * returns:
+ * positive (>=0) value => SUCCESS
+ * negative value => FAILURE
+ */
+static int adc1x8s102_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct adc1x8s102_state *st;
+
+ st = iio_priv(indio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ ret = -EBUSY;
+ dev_warn(&st->spi->dev,
+ "indio_dev->currentmode is INDIO_BUFFER_TRIGGERED\n");
+ } else {
+ ret = adc1x8s102_scan_direct(st, chan->address);
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret < 0)
+ return ret;
+ *val = ADC1x8S102_RES_DATA(ret);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ if (NULL != st->reg)
+ *val = regulator_get_voltage(st->reg) / 1000;
+ else
+ *val = st->ext_vin;
+
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ dev_warn(&st->spi->dev,
+ "Invalid channel type %u for channel %d\n",
+ chan->type, chan->channel);
+ return -EINVAL;
+ }
+ default:
+ dev_warn(&st->spi->dev, "Invalid IIO_CHAN_INFO: %lu\n", m);
+ return -EINVAL;
+ }
+}
+
+
+
+static const struct iio_info adc1x8s102_info = {
+ .read_raw = &adc1x8s102_read_raw,
+ .update_scan_mode = &adc1x8s102_update_scan_mode,
+ .driver_module = THIS_MODULE,
+};
+
+
+static int adc1x8s102_probe(struct spi_device *spi)
+{
+ struct adc1x8s102_platform_data *pdata = spi->dev.platform_data;
+ struct adc1x8s102_state *st;
+ struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
+ int ret;
+
+ if (NULL == indio_dev) {
+ dev_crit(&spi->dev, "Cannot allocate memory for indio_dev\n");
+ return -ENOMEM;
+ }
+
+ st = iio_priv(indio_dev);
+ if (NULL == pdata) {
+ dev_err(&spi->dev, "Cannot get adc1x8s102 platform data\n");
+ return -EFAULT;
+ }
+ st->ext_vin = pdata->ext_vin;
+
+ /* Use regulator, if available. */
+ st->reg = regulator_get(&spi->dev, "vref");
+ if (IS_ERR(st->reg)) {
+ ret = PTR_ERR(st->reg);
+ dev_warn(&spi->dev,
+ "Cannot get 'vref' regulator\n");
+ goto error_free;
+ }
+ ret = regulator_enable(st->reg);
+ if (ret < 0) {
+ dev_warn(&spi->dev,
+ "Cannot enable vref regulator\n");
+ goto error_put_reg;
+ }
+
+ spi_set_drvdata(spi, indio_dev);
+ st->spi = spi;
+
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = adc1x8s102_channels;
+ indio_dev->num_channels = ARRAY_SIZE(adc1x8s102_channels);
+ indio_dev->info = &adc1x8s102_info;
+
+ /* Setup default message */
+ st->scan_single_xfer.tx_buf = st->tx_buf;
+ st->scan_single_xfer.rx_buf = st->rx_buf;
+ st->scan_single_xfer.len = 2 * sizeof(__be16);
+ st->scan_single_xfer.cs_change = 0;
+
+ spi_message_init(&st->scan_single_msg);
+ spi_message_add_tail(&st->scan_single_xfer, &st->scan_single_msg);
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ &adc1x8s102_trigger_handler, NULL);
+ if (ret)
+ goto error_disable_reg;
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&spi->dev,
+ "Failed to register IIO device\n");
+ goto error_cleanup_ring;
+ }
+ return 0;
+
+error_cleanup_ring:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_disable_reg:
+ regulator_disable(st->reg);
+error_put_reg:
+ regulator_put(st->reg);
+error_free:
+ iio_device_free(indio_dev);
+
+ return ret;
+}
+
+
+static int adc1x8s102_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct adc1x8s102_state *st;
+
+ indio_dev = spi_get_drvdata(spi);
+ if (NULL == indio_dev) {
+ dev_err(&spi->dev, "Cannot get spi_device drvdata\n");
+ return -EFAULT;
+ }
+
+ st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ iio_triggered_buffer_cleanup(indio_dev);
+
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
+
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+
+static const struct spi_device_id adc1x8s102_id[] = {
+ {"adc1x8s102", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, adc1x8s102_id);
+
+static struct spi_driver adc1x8s102_driver = {
+ .driver = {
+ .name = "adc1x8s102",
+ .owner = THIS_MODULE,
+ },
+ .probe = adc1x8s102_probe,
+ .remove = adc1x8s102_remove,
+ .id_table = adc1x8s102_id,
+};
+module_spi_driver(adc1x8s102_driver);
+
+MODULE_AUTHOR("Bogdan Pricop <bogdan.pri...@emutex.com>");
+MODULE_DESCRIPTION("Texas Instruments ADC1x8S102 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/adc1x8s102.h
b/include/linux/platform_data/adc1x8s102.h
new file mode 100644
index 0000000..a32a499
--- /dev/null
+++ b/include/linux/platform_data/adc1x8s102.h
@@ -0,0 +1,30 @@
+/*
+ * ADC1x8S102 SPI ADC driver
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+
+#ifndef __LINUX_PLATFORM_DATA_ADC1x8S102_H__
+#define __LINUX_PLATFORM_DATA_ADC1x8S102_H__
+
+
+/**
+ * struct adc1x8s102_platform_data - Platform data for the adc1x8s102 ADC
driver
+ * @ext_vin: External input voltage range for all voltage input channels
+ * This is the voltage level of pin VA in millivolts
+ **/
+struct adc1x8s102_platform_data {
+ u16 ext_vin;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_ADC1x8S102_H__ */