What is the rational for CONFIG_DRM_LOAD_EDID_FIRMWARE=y? From my
understanding it is to manually load monitor information for monitors
that don't provide it itself. If my understanding is correct this option
shouldn't be necessary for general Skylake enabling.

---
Cal

On 04/27/2016 09:24 PM, [email protected] wrote:
> From: Ong Chun Weng <[email protected]>
>
> ---
>  features/soc/skylake/skylake.cfg | 22 ++++++++++++++++++++++
>  features/soc/skylake/skylake.scc | 12 ++++++++++++
>  2 files changed, 34 insertions(+)
>  create mode 100644 features/soc/skylake/skylake.cfg
>  create mode 100644 features/soc/skylake/skylake.scc
>
> diff --git a/features/soc/skylake/skylake.cfg 
> b/features/soc/skylake/skylake.cfg
> new file mode 100644
> index 0000000..5e09436
> --- /dev/null
> +++ b/features/soc/skylake/skylake.cfg
> @@ -0,0 +1,22 @@
> +CONFIG_CPU_IDLE=y
> +CONFIG_MFD_INTEL_LPSS=m
> +CONFIG_MFD_INTEL_LPSS_ACPI=m
> +CONFIG_MFD_INTEL_LPSS_PCI=m
> +CONFIG_INTEL_IDMA64=m
> +CONFIG_GPIO_LYNXPOINT=m
> +CONFIG_USB_EHCI_PCI=y
> +CONFIG_POWERCAP=y
> +CONFIG_INTEL_RAPL=m
> +CONFIG_INTEL_POWERCLAMP=m
> +CONFIG_HWMON=y
> +CONFIG_SENSORS_I5500=m
> +CONFIG_DRM_LOAD_EDID_FIRMWARE=y
> +CONFIG_SND_HDA_I915=y
> +CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
> +CONFIG_SND_SOC_INTEL_SST=m
> +CONFIG_SND_SOC_INTEL_SST_ACPI=m
> +CONFIG_SND_DYNAMIC_MINORS=y
> +CONFIG_NETCONSOLE=y
> +CONFIG_BT_HCIUART=m
> +CONFIG_BT_HCIUART_INTEL=y
> +CONFIG_INTEL_MEI_TXE=m
> diff --git a/features/soc/skylake/skylake.scc 
> b/features/soc/skylake/skylake.scc
> new file mode 100644
> index 0000000..bc59f22
> --- /dev/null
> +++ b/features/soc/skylake/skylake.scc
> @@ -0,0 +1,12 @@
> +# skylake.scc
> +#
> +# Features and devices found on the Skylake SoCs
> +#
> +
> +# Enable I2C Support
> +include features/i2c/i2c.scc
> +
> +# Enable mac 80211 + WLAN support
> +include features/mac80211/mac80211.scc
> +
> +kconf hardware skylake.cfg

-- 
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to