On 2016-07-20 06:34 PM, Ernst, Eric wrote:
Please consider pull-request listed below. We tested on Grosse Tete and verify proper PM for USB after applying the set. This was rebased onto latest of bxt-rebase, but I think we should consider also for standard/intel/base.
They looked clean enough to me, so I went for the standard/intel/base option. These are now pushed to the repo, let me know if there are any build or runtime issues. The merge was clean for all branches, so I don't expect anything. Bruce
Let me know if you have questions/issues. -Eric The following changes since commit 256385e1e85055afb8432ecf0aeee65e2590d142: usb: typec: add PD sink port support for Intel Whiskey Cove PMIC USB Type-C PHY driver (2016-07-15 11:05:09 -0400) are available in the git repository at: https://github.com/egernst/linux-yocto-4.4.git bxt-dwc3-pm-backport for you to fetch changes up to f6d09c801315b8d90681eff66668b90c19cb0e51: UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor support (2016-07-19 16:34:20 -0700) ---------------------------------------------------------------- Dan Carpenter (1): UPSTREAM: usb: dwc3: gadget: fix mask and shift order in DWC3_DCFG_NUMP() Du, Changbin (1): UPSTREAM: usb: dwc3: make dwc3_debugfs_init return value be void Felipe Balbi (50): UPSTREAM: usb: dwc3: drop FIFO resizing logic UPSTREAM: usb: dwc3: gadget: always enable CSP UPSTREAM: usb: dwc3: gadget: purge dev_dbg() calls UPSTREAM: usb: dwc3: gadget: pass a condition to dev_WARN_ONCE() UPSTREAM: usb: dwc3: core: purge dev_dbg() calls UPSTREAM: usb: dwc3: core: improve reset sequence UPSTREAM: usb: dwc3: gadget: fix endpoint renaming UPSTREAM: usb: dwc3: core: fix PHY handling during suspend UPSTREAM: usb: dwc3: better name for our request management lists UPSTREAM: usb: dwc3: remove num_event_buffers UPSTREAM: usb: dwc3: drop ev_buffs array UPSTREAM: usb: dwc3: gadget: pass ev_buff as cookie to irq handler UPSTREAM: usb: dwc3: gadget: combine return points into a single one UPSTREAM: usb: dwc3: gadget: clear SUSPHY bit before ep cmds UPSTREAM: usb: dwc3: gadget: extract unlocked dwc3_gadget_wakeup() UPSTREAM: usb: dwc3: gadget: put link to U0 before Start Transfer UPSTREAM: usb: dwc3: gadget: rename busy/free_slot to trb_enqueue/dequeue UPSTREAM: usb: dwc3: increase maximum number of TRBs per endpoint UPSTREAM: usb: dwc3: core: document struct dwc3_request UPSTREAM: usb: dwc3: switch trb enqueue/dequeue and first_trb_index to u8 UPSTREAM: usb: dwc3: get rid of DWC3_TRB_MASK UPSTREAM: usb: dwc3: gadget: add trb enqueue/dequeue helpers UPSTREAM: usb: dwc3: gadget: move % operation to increment helpers UPSTREAM: usb: dwc3: gadget: use link TRB for all endpoint types UPSTREAM: usb: dwc3: gadget: remove newline from trace UPSTREAM: usb: dwc3: gadget: don't interrupt when chained UPSTREAM: usb: dwc3: core: add fifo space helper UPSTREAM: usb: dwc3: core: add helper to extract trb type UPSTREAM: usb: dwc3: gadget: update DCFG.NumP to max burst size UPSTREAM: usb: dwc3: gadget: disable automatic calculation of ACK TP NUMP FROMLIST: usb: dwc3: gadget: re-factor ->udc_start and ->udc_stop FROMLIST: usb: dwc3: gadget: fix gadget suspend/resume FROMLIST: usb: dwc3: core: get rid of DWC3_PM_OPS macro FROMLIST: usb: dwc3: gadget: prepare TRBs on update transfers too FROMLIST: usb: dwc3: gadget: simplify __dwc3_gadget_kick_transfer() FROMLIST: usb: dwc3: gadget: rely on sg_is_last() and list_is_last() FROMLIST: usb: dwc3: gadget: remove udelay(1) when sending ep cmds FROMLIST: usb: dwc3: gadget: return 0 if we try to Wakeup in superspeed FROMLIST: usb: dwc3: gadget: split __dwc3_gadget_kick_transfer() FROMLIST: usb: dwc3: gadget: initialize NUMP based on RxFIFO Size FROMLIST: usb: dwc3: gadget: pass dep as argument to endpoint command FROMLIST: usb: dwc3: gadget: add a pointer to endpoint registers FROMLIST: usb: dwc3: core: move fladj to dwc3 structure FROMLIST: usb: dwc3: core: re-factor init and exit paths FROMLIST: usb: dwc3: core: simplify suspend/resume operations FROMLIST: usb: dwc3: gadget: hold gadget IRQ in dwc->irq_gadget FROMLIST: usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED FROMLIST: usb: dwc3: gadget: fix for possible endpoint disable race FROMLIST: usb: dwc3: implement runtime PM FROMLIST: usb: dwc3: pci: add Power Management dummy hooks Heikki Krogerus (2): UPSTREAM: usb: dwc3: pci: make build-in device properties available UPSTREAM: usb: dwc3: pci: pass the platform device as a parameter to dwc3_pci_quirks() Jiebing Li (1): UPSTREAM: usb: dwc3: gadget: release spin lock during gadget resume John Youn (7): UPSTREAM: usb: dwc3: Update speed checks for SuperSpeedPlus UPSTREAM: usb: dwc3: Enable SuperSpeedPlus UPSTREAM: usb: dwc3: Update maximum_speed for SuperSpeedPlus UPSTREAM: usb: dwc3: Validate the maximum_speed parameter UPSTREAM: usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command UPSTREAM: usb: dwc3: DWC_usb31 controller check UPSTREAM: usb: dwc3: Update register fields for SuperSpeedPlus Konrad Leszczynski (2): UPSTREAM: usb: dwc3: gadget: give better command return code FROMLIST: usb: dwc3: fix for the isoc transfer EP_BUSY flag Mathias Nyman (3): UPSTREAM: usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices UPSTREAM: usb: Add USB3.1 SuperSpeedPlus Isoc Endpoint Companion descriptor UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor support Rajesh Bhagat (1): UPSTREAM: usb: dwc3: add disable receiver detection in P3 quirk Roger Quadros (1): UPSTREAM: usb: dwc3: gadget: Fix suspend/resume during device mode Documentation/devicetree/bindings/usb/dwc3.txt | 4 +- .../devicetree/bindings/usb/qcom,dwc3.txt | 1 - drivers/usb/common/common.c | 1 + drivers/usb/core/config.c | 6 +- drivers/usb/core/devices.c | 10 +- drivers/usb/core/hcd-pci.c | 2 +- drivers/usb/core/hcd.c | 6 +- drivers/usb/core/hub.c | 26 +- drivers/usb/core/urb.c | 3 +- drivers/usb/core/usb.h | 2 +- drivers/usb/dwc3/core.c | 501 ++++++----- drivers/usb/dwc3/core.h | 146 ++- drivers/usb/dwc3/debug.h | 6 +- drivers/usb/dwc3/debugfs.c | 245 ++--- drivers/usb/dwc3/dwc3-pci.c | 57 +- drivers/usb/dwc3/ep0.c | 47 +- drivers/usb/dwc3/gadget.c | 990 +++++++++++---------- drivers/usb/dwc3/gadget.h | 10 +- drivers/usb/dwc3/io.h | 7 +- drivers/usb/dwc3/platform_data.h | 2 +- include/linux/usb.h | 1 + include/uapi/linux/usb/ch9.h | 29 + 22 files changed, 1167 insertions(+), 935 deletions(-)
-- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
