From: Felipe Balbi <[email protected]>
commit 851a15114895c5bce163a6f2d57e0aa4658a1be4 upstream.
DNV's iTCO is slightly different with SMBCTRL sitting at a different
offset when compared to all other devices. Let's fix so that we can
properly use iTCO watchdog.
Fixes: 84d7f2ebd70d ("i2c: i801: Add support for Intel DNV")
Cc: <[email protected]> # v4.4+
Signed-off-by: Felipe Balbi <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Yongxin Liu <[email protected]>
---
drivers/i2c/busses/i2c-i801.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index aa726607645e..45fcf0c37a9e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -139,6 +139,7 @@
#define SBREG_BAR 0x10
#define SBREG_SMBCTRL 0xc6000c
+#define SBREG_SMBCTRL_DNV 0xcf000c
/* Host status bits for SMBPCISTS */
#define SMBPCISTS_INTS BIT(3)
@@ -1396,7 +1397,11 @@ static void i801_add_tco(struct i801_priv *priv)
spin_unlock(&p2sb_spinlock);
res = &tco_res[ICH_RES_MEM_OFF];
- res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+ if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
+ res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+ else
+ res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+
res->end = res->start + 3;
res->flags = IORESOURCE_MEM;
--
2.14.4
--
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto
