This adds the cfg & scc files to support the LS2088A-RDB. Signed-off-by: Xulin Sun <xulin....@windriver.com> --- bsp/nxp-ls20xx/nxp-ls20xx-standard.scc | 8 ++ bsp/nxp-ls20xx/nxp-ls20xx.cfg | 162 +++++++++++++++++++++++++ bsp/nxp-ls20xx/nxp-ls20xx.scc | 7 ++ 3 files changed, 177 insertions(+) create mode 100755 bsp/nxp-ls20xx/nxp-ls20xx-standard.scc create mode 100755 bsp/nxp-ls20xx/nxp-ls20xx.cfg create mode 100755 bsp/nxp-ls20xx/nxp-ls20xx.scc
diff --git a/bsp/nxp-ls20xx/nxp-ls20xx-standard.scc b/bsp/nxp-ls20xx/nxp-ls20xx-standard.scc new file mode 100755 index 00000000..e0d9b2b7 --- /dev/null +++ b/bsp/nxp-ls20xx/nxp-ls20xx-standard.scc @@ -0,0 +1,8 @@ +define KMACHINE nxp-ls20xx +define KTYPE standard +define KARCH arm64 + +include ktypes/standard/standard.scc +branch nxp-ls20xx + +include nxp-ls20xx.scc diff --git a/bsp/nxp-ls20xx/nxp-ls20xx.cfg b/bsp/nxp-ls20xx/nxp-ls20xx.cfg new file mode 100755 index 00000000..f554c916 --- /dev/null +++ b/bsp/nxp-ls20xx/nxp-ls20xx.cfg @@ -0,0 +1,162 @@ +.......................................................................... +. WARNING +. +. This file is a kernel configuration fragment, and not a full kernel +. configuration file. The final kernel configuration is made up of +. an assembly of processed fragments, each of which is designed to +. capture a specific part of the final configuration (e.g. platform +. configuration, feature configuration, and board specific hardware +. configuration). For more information on kernel configuration, please +. consult the product documentation. +. +.......................................................................... + +CONFIG_ARM64=y +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_SCHED_MC=y +CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_V3=y + +CONFIG_PCI=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCI_MSI=y + +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPUFREQ_DT=y +CONFIG_QORIQ_CPUFREQ=y + +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SST25L=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_NAND_FSL_IFC=y +CONFIG_SPI_FSL_QUADSPI=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_HISI_SAS=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +CONFIG_SATA_SIL24=y + +CONFIG_FSL_XGMAC_MDIO=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_E1000=y +CONFIG_E1000E=y + +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y + +CONFIG_SPI=y +CONFIG_SPI_FSL_DSPI=y +CONFIG_SPI_PL022=y +CONFIG_SPI_NXP_FLEXSPI=y + +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y + +CONFIG_THERMAL=y +CONFIG_THERMAL_OF=y +CONFIG_CPU_THERMAL=y +CONFIG_THERMAL_EMULATION=y +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y + +CONFIG_USB=y +CONFIG_USB_OTG=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC2=y +CONFIG_USB_GADGET=y + +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_MMC_SPI=y +CONFIG_MMC_DW=y + +CONFIG_GPIOLIB=y +CONFIG_OF_GPIO=y + +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BITBANG=y +CONFIG_PHYLIB=y +CONFIG_AQUANTIA_PHY=y +CONFIG_CORTINA_PHY=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_IMX=y +CONFIG_I2C_MUX_PCA954x=y + +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_PCF2127=y + +CONFIG_DMADEVICES=y +CONFIG_FSL_EDMA=y +CONFIG_CMA=y +CONFIG_DMA_CMA=y + +CONFIG_VFIO=y +CONFIG_VFIO_PCI=y + +CONFIG_STAGING=y +CONFIG_FSL_MC_BUS=y +CONFIG_FSL_MC_DPIO=y + +CONFIG_CLK_QORIQ=y + +CONFIG_PHY_XGENE=y + +CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set + +# EDAC +CONFIG_EDAC_LAYERSCAPE=y + +CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_INA2XX=y + +CONFIG_ARM_SBSA_WATCHDOG=y diff --git a/bsp/nxp-ls20xx/nxp-ls20xx.scc b/bsp/nxp-ls20xx/nxp-ls20xx.scc new file mode 100755 index 00000000..36f0ee7a --- /dev/null +++ b/bsp/nxp-ls20xx/nxp-ls20xx.scc @@ -0,0 +1,7 @@ +kconf hardware nxp-ls20xx.cfg +kconf hardware features/edac/edac.cfg + +include cfg/usb-mass-storage.scc + +include features/hugetlb/hugetlb.scc +include arch/arm/32bit-compat.scc -- 2.17.1 -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
