Hi Tony, First of all I'm not sure that the 6LowPAN fully merged to linux-zigbee tree due to I worked with mainline kernel, so it may be a point.
Moreover, have you red about 6lowpan in kernel documentation (Documentation folder in sources)? Here I put some notes how to bring up ipv6 interface. Please feel free to ask me. With best regards, Alexander 9 апреля 2012 г. 23:05 пользователь Tony Cheneau <tony.cheneau+zigbee...@amnesiak.org> написал: > Good afternoon, > > I'm still trying to figure out if I have the latest version of the > 6LowPAN module. I'm currently using the devel branch of the Linux Zigbee > kernel (rev: 9155ba3a1c13ba, slightly patched the autofs4 files so that > it compiles) and I did not managed to get the 6LoWPAN part working > (izchat works great). > > It is crashing any of the two testbed computers each time I try to set > up a 6LoWPAN network (the crash message on the console seems to be > changing all the time and does not point toward any error in the 802154 > or 6LoWPAN subsystem, but I'll investigate it further if needed). I've > been using the serial driver (with an econotag) and the fakehard driver, > both yield the same outcome: the system hangs. > > Here is how I reproduce the crash: >> # this line is one with the serial driver >> izattach /dev/ttyUSB1 >> iz add wpan-phy0 >> ip link set wpan0 address ca:fe:ca:fe:ca:fe:ca:fe >> ifconfig wpan0 up >> izcoordinator -i wpan0 -s 1 -p 777 -c 11 -l lease & >> modprobe 6lowpan >> ip link add link wpan0 name lowpan0 type lowpan >> ip link set lowpan0 address de:ad:be:ef:ca:fe:ca:fe >> ifconfig lowpan0 up > > At this point (ifconfig lowpan0 up), the system stops functioning and > the SSH access is frozen. Perhaps there is a step that I'm missing, I do > not know. But I start wondering if I am the only one experiencing this > issue. > > Please let me know if you need more information on my system in order > to help me debug them. > As always, help, in any form, is greatly appreciated. > > Regards, > Tony Cheneau > > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Linux-zigbee-devel mailing list > Linux-zigbee-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Linux-zigbee-devel mailing list Linux-zigbee-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
