Hi Alan,
Thanks for your help.
I got an error on building. I did the following steps:
I extracted libnl-3.2.7.tar.gz and linux-zigbee (git://
github.com/tcheneau/linux-zigbee.git) side-by-side.
$ cd libnl-3.2.7/
$ ./configure --prefix=$PWD/../out --host=arm-linux
$ make
$ make install
At this point ok, it was generated the folder ../out with the files
$ cd ..
$ cd linux-zigbee/
$ autoreconf
$ automake --add-missing
$ autoreconf
$ LDFLAGS=-L$PWD/../out/lib ./configure --prefix=$PWD/../out
--host=arm-linux
I got the error:
checking for NL... no
configure: error: Package requirements (libnl-3.0, libnl-genl-3.0)
were not met:
So i try:
$ NL_CFLAGS=-I$PWD/out/include NL_LIBS=-L$PWD/../out/lib ./configure
--prefix=$PWD/../out --host=arm-linux
and i got:
checking for NL... yes
checking whether libnl requires additional libraries... failure
configure: error: failed to link program with libnl
See `config.log' for more details
Shoud I use the linux-zigbee userspace from Tony Cheneau's Github?
Best regards,
Joao Paulo
2013/3/18 Alan Ott <a...@signal11.us>
> On 03/18/2013 04:45 AM, João Paulo Bodanese wrote:
> > I am trying to set up the demo that Alan presented at Linux Conference
> > Europe 2012.
> > I have already installed the 3.7-rc2 Linux kernel in the BeagleBone
> > with all the patches that its described in his website.
>
> Hi João,
>
> At this point you're best off doing something slightly different than
> that, which I'll describe.
>
> Grab the BeagleBone 3.8 kernel, which already has Tony's patches in it:
> https://github.com/beagleboard/kernel/tree/3.8
>
> Apply these patches to it:
> http://www.signal11.us/~alan/patches/patches-joao.tar.gz
> (btw, those were sent to next-next just a minute ago)
>
> Also apply this one:
> http://www.signal11.us/~alan/patches/bone-dt-cape-override.diff
>
> Install the linux-zigbee userspace tools from source:
> 1. extract libnl (I'm using 3.2.7) and linux-zigbee userspace tools (use
> the ones from git) side-by-side.
>
> 2. Build libnl with:
> ./configure --prefix=$PWD/../out --host=arm-linux
> make
>
> 3. Build linux-zigbee userspace tools with:
> LDFLAGS=-L$PWD/../out/lib ./configure \
> --prefix=$PWD/../out --host=arm-linux
> make
>
> 4. Output files will be in out/ . Copy these to your BeagleBone.
>
> Connect your mrf24j40ma to SPI1 (CS0), and connect the INT pin to
> GPIO1_29 (see my DT file, patch 0001).
>
> Once the Bone is running, load the DT for the MRF24J40:
> echo BB-BONE-MRF24J40 >/sys/devices/bone_capemgr.7/slots
>
> Then run this setup script:
> http://www.signal11.us/~alan/patches/setup
>
> I'll get this stuff up on the website soon, as it's a popular question.
> Or if you have time (all you need is a souceforge account)....
>
> > My question is how to install the linux-zigbee userspace tools in the
> > BeagleBone node? Is there a recipe to install it in the Angstron?
>
> Not that I know of. Feel free to find out for sure and let us know.
>
> Alan.
>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
