Increase the buffer length from 10 to 300 packets. Consider that traffic on
mac802154 devices will often be 6LoWPAN, and a full-length (1280 octet)
IPv6 packet will fragment into 15 6LoWPAN fragments (because the MTU of
IEEE 802.15.4 is 127). A 300-packet queue is really 20 full-length IPv6
packets.
With a queue length of 10, an entire IPv6 packet was unable to get queued
at one time, causing fragments to be dropped, and making reassembly
impossible.
Signed-off-by: Alan Ott <a...@signal11.us>
---
net/mac802154/wpan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac802154/wpan.c b/net/mac802154/wpan.c
index 7d3f659..2ca2f4d 100644
--- a/net/mac802154/wpan.c
+++ b/net/mac802154/wpan.c
@@ -360,7 +360,7 @@ void mac802154_wpan_setup(struct net_device *dev)
dev->header_ops = &mac802154_header_ops;
dev->needed_tailroom = 2; /* FCS */
dev->mtu = IEEE802154_MTU;
- dev->tx_queue_len = 10;
+ dev->tx_queue_len = 300;
dev->type = ARPHRD_IEEE802154;
dev->flags = IFF_NOARP | IFF_BROADCAST;
dev->watchdog_timeo = 0;
--
1.7.11.2
------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire
the most talented Cisco Certified professionals. Visit the
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
