Hi Randy,

On an Econotag, I would flash the "linux_redbee-econotag.bin". I never 
tested the other images.

Let me know how that works for you.

Regards,
Tony

Le 2013-12-23 18:24, Randy Graham a écrit :
> Hi Tony,
>
> Thanks for your help, just one more question.
>
> Exactly what firmware do I need to flash to the econotag for use with
> your serial driver ?
>
> There seem to be a few images that get built under
> linux802154_serialdev that I could flash.
>
> -Randy
>
> On Fri, Dec 20, 2013 at 10:17 AM, Tony Cheneau
> <tony.chen...@amnesiak.org> wrote:
>
>> Hi Randy,
>>
>> It should work just fine with a recent net-next kernel. I tried it 
>> this week and it was working without modifications.
>>
>> If you are using my "code", you might also be interesting in using 
>> some recent linux-zigbee tools so that you can select an higher 
>> baudrate in the "izattach" tool. You'll have to ask the tool to work 
>> at 926000bps with my modified firmware.
>>
>> Also, you might be interested in [1] and [2] in order to set up a 
>> node (or to see how I set things up). This is some script I wrote some 
>> time ago in order to save some time when configuring my Econotags.
>>
>> Regards,
>> Tony
>>
>> [1]: https://gist.github.com/tcheneau/5757352 [6]
>> [2]: https://gist.github.com/tcheneau/8026274 [7]
>>
>> Le 2013-12-20 18:58, Randy Graham a écrit :
>>
>>> Thanks Tony.
>>>
>>> I have a couple of econotags so I'll give your driver and firmware 
>>> a shot.
>>>
>>> Ultimately I want to get this running on our custom freescale board
>>> with mrf24j40 and have been using the beaglebone as a stepping 
>>> stone,
>>> but getting my econotags working would also be a good step.
>>>
>>> I am running a very recent net-next kernel on my linux development
>>> machine, so hopefully I am sufficiently up to date there.
>>>
>>> Thanks again,
>>>
>>> -Randy
>>>
>>> On Fri, Dec 20, 2013 at 7:39 AM, Tony Cheneau 
>>> <tony.chen...@amnesiak.org> wrote:
>>>
>>>> Hi Randy,
>>>>
>>>> At work, I use some RedBee Econotags with a slightly modified 
>>>> version of the serial driver [1] and of the firmware [2]. It works 
>>>> reasonably well (I'm experiencing 5% packet loss maybe, but it might 
>>>> be due to some WiFi interferences).
>>>>
>>>> Regards,
>>>> Tony
>>>>
>>>> [1]: https://gist.github.com/tcheneau/5752273 [4] [4]
>>>> [2]: https://github.com/nist-emntg/linux802154-serialdev [5] [5]
>>>>
>>>> Le 2013-12-17 17:55, Randy Graham a écrit :
>>>>
>>>>> Hello,
>>>>>
>>>>> I am curious to know what hardware folks here are using for 
>>>>> 6lowpan,
>>>>> would you mind sharing ?
>>>>>
>>>>> I am trying to get a beaglebone with a mrf24j40 radio up and 
>>>>> running
>>>>> with 6Lowpan and am having some difficulties.
>>>>>
>>>>> Has anyone got this hardware combination to work with a recent 
>>>>> kernel ?
>>>>>
>>>>> I have created a DT fragment for my radio 'cape' as per
>>>>> http://elinux.org/Capemgr [1] [1] [1] and it loads and 
>>>>> initializes fine with a
>>>>>
>>>>> 3.8 kernel, but when I try to use a more recent kernel, the DT
>>>>> fragment loads, but the IRQ reported by the mrf24j40 driver is 
>>>>> always
>>>>> zero. If I use the 3.8 kernel, the driver reports a correct IRQ.
>>>>>
>>>>> Has anyone seen this issue ?
>>>>>
>>>>> Thanks for any insights.
>>>>>
>>>>> -Randy
>>>>>
>>>>> Links:
>>>>> ------
>>>>> [1] http://elinux.org/Capemgr [1] [1]
>>>>>
>>>>> 
>>>>> ------------------------------------------------------------------------------
>>>>> Rapidly troubleshoot problems before they affect your business. 
>>>>> Most IT
>>>>> organizations don't have a clear picture of how application 
>>>>> performance
>>>>> affects their revenue. With AppDynamics, you get 100% visibility 
>>>>> into your
>>>>> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of 
>>>>> AppDynamics Pro!
>>>>>
>>>>> 
>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
>>>>>  
>>>>> [2] [2]
>>>>>
>>>>> _______________________________________________
>>>>> Linux-zigbee-devel mailing list
>>>>> Linux-zigbee-devel@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel 
>>>>> [3] [3]
>>>
>>> Links:
>>> ------
>>> [1] http://elinux.org/Capemgr [1]
>>> [2]
>>>
>>> 
>>> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&amp;iu=/4140/ostg.clktrk
>>>  
>>> [2]
>>> [3] https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel 
>>> [3]
>>> [4] https://gist.github.com/tcheneau/5752273 [4]
>>> [5] https://github.com/nist-emntg/linux802154-serialdev [5]
>
>
>
> Links:
> ------
> [1] http://elinux.org/Capemgr
> [2]
> 
> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&amp;iu=/4140/ostg.clktrk
> [3] https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
> [4] https://gist.github.com/tcheneau/5752273
> [5] https://github.com/nist-emntg/linux802154-serialdev
> [6] https://gist.github.com/tcheneau/5757352
> [7] https://gist.github.com/tcheneau/8026274

------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT 
organizations don't have a clear picture of how application performance 
affects their revenue. With AppDynamics, you get 100% visibility into your 
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel

Reply via email to