On 28/01/14 20:06, Phoebe Buckheister wrote:
> The standard assigns channel 0 on page 2 to be 100kbps QPSK in the
> 868.3MHz band. Add support to the at86rf230 driver for this channel and
> page, at the moment predicated only for the RF212 chip.
> 
> Per the datasheet, configurations for page 0, channels 0 to 10 and page
> 2, channels 0 to 10 differ only in the BPSK_QPSK bit. Support for
> channels 1 to 10 is untested.

Looks good. Let's beat patch #1 to the shape and merge them!


-- 
With best wishes
Dmitry

------------------------------------------------------------------------------
WatchGuard Dimension instantly turns raw network data into actionable 
security intelligence. It gives you real-time visual feedback on key
security issues and trends.  Skip the complicated setup - simply import
a virtual appliance and go from zero to informed in seconds.
http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel

Reply via email to