hai...
please clarify the below doubts..
1. Is the mac layer (mac802154) is able to fragment the packets or not ?
Because h/w driver is reading the received packets and putting in the skb. This
skb [skb->data] will consist of more than one packet. Dividing the entire
packet into single single packet and sending it to the userspace is happening at
maclevel or not?
2. What about FCS field in IEEE-802.15.4 header ?
If i read the packet from h/w , every packet included the FCS filed in the
header. Is the FCS field used at mac802154 level or not...?
Should i remove the FCS field for every packet at driver level and give it to
ieee802154_rx_irqsafe() ?
Regards,
Bhadram.
-------------------------------------------------------------------------------------------------------------------------------
This e-mail is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy
all copies and the original message. Any unauthorized review, use,
disclosure, dissemination, forwarding, printing or copying of this email
is strictly prohibited and appropriate legal action will be taken.
-------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------
WatchGuard Dimension instantly turns raw network data into actionable
security intelligence. It gives you real-time visual feedback on key
security issues and trends. Skip the complicated setup - simply import
a virtual appliance and go from zero to informed in seconds.
http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
