The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Support for CCA mode setting is included in the at86rf230 driver,
predicated for RF212 chips.
Signed-off-by: Phoebe Buckheister <phoebe.buckheis...@itwm.fraunhofer.de>
---
drivers/net/ieee802154/at86rf230.c | 9 +++++++++
include/linux/nl802154.h | 1 +
include/net/mac802154.h | 5 +++++
include/net/wpan-phy.h | 1 +
net/ieee802154/nl-phy.c | 32 +++++++++++++++++++++++++++++---
net/ieee802154/nl_policy.c | 1 +
net/mac802154/ieee802154_dev.c | 11 +++++++++++
7 files changed, 57 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ieee802154/at86rf230.c
b/drivers/net/ieee802154/at86rf230.c
index 3d40c23..c60871a 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -794,6 +794,14 @@ at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
}
+static int
+at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
+{
+ struct at86rf230_local *lp = dev->priv;
+
+ return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
+}
+
static struct ieee802154_ops at86rf230_ops = {
.owner = THIS_MODULE,
.xmit = at86rf230_xmit,
@@ -814,6 +822,7 @@ static struct ieee802154_ops at86rf212_ops = {
.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
.set_txpower = at86rf212_set_txpower,
.set_lbt = at86rf212_set_lbt,
+ .set_cca_mode = at86rf212_set_cca_mode,
};
static void at86rf230_irqwork(struct work_struct *work)
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 326baee..5edefc1 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -72,6 +72,7 @@ enum {
IEEE802154_ATTR_TXPOWER,
IEEE802154_ATTR_LBT_ENABLED,
+ IEEE802154_ATTR_CCA_MODE,
__IEEE802154_ATTR_MAX,
};
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 521edcb..1a98e50 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -122,6 +122,10 @@ struct ieee802154_dev {
* Enables or disables listen before talk on the device. Called with
* pib_lock held.
* Returns either zero, or negative errno.
+ *
+ * set_cca_mode
+ * Sets the CCA mode used by the device. Called with pib_lock held.
+ * Returns either zero, or negative errno.
*/
struct ieee802154_ops {
struct module *owner;
@@ -140,6 +144,7 @@ struct ieee802154_ops {
u8 addr[IEEE802154_ADDR_LEN]);
int (*set_txpower)(struct ieee802154_dev *dev, int db);
int (*set_lbt)(struct ieee802154_dev *dev, bool on);
+ int (*set_cca_mode)(struct ieee802154_dev *dev, u8 mode);
};
/* Basic interface to register ieee802154 device */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 804e6c4..03b5905 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -58,6 +58,7 @@ struct wpan_phy {
int (*set_txpower)(struct wpan_phy *phy, int db);
int (*set_lbt)(struct wpan_phy *phy, bool on);
+ int (*set_cca_mode)(struct wpan_phy *phy, u8 cca_mode);
char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
};
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index f029310..36f58d6 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -57,7 +57,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32
portid,
nla_put_u8(msg, IEEE802154_ATTR_PAGE, phy->current_page) ||
nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) ||
nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
- nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt))
+ nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt) ||
+ nla_put_u8(msg, IEEE802154_ATTR_CCA_MODE, phy->cca_mode))
goto nla_put_failure;
for (i = 0; i < 32; i++) {
if (phy->channels_supported[i])
@@ -385,6 +386,23 @@ static int phy_set_lbt(struct wpan_phy *phy, struct
genl_info *info)
return 0;
}
+static int phy_set_cca_mode(struct wpan_phy *phy, struct genl_info *info)
+{
+ u8 mode = nla_get_u8(info->attrs[IEEE802154_ATTR_CCA_MODE]);
+ int rc;
+
+ if (mode > 3)
+ return -EINVAL;
+
+ rc = phy->set_cca_mode(phy, mode);
+ if (rc < 0)
+ return rc;
+
+ phy->cca_mode = mode;
+
+ return 0;
+}
+
int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
{
struct wpan_phy *phy;
@@ -394,7 +412,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct
genl_info *info)
pr_debug("%s\n", __func__);
if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
- !info->attrs[IEEE802154_ATTR_LBT_ENABLED])
+ !info->attrs[IEEE802154_ATTR_LBT_ENABLED] &&
+ !info->attrs[IEEE802154_ATTR_CCA_MODE])
return -EINVAL;
name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
@@ -406,7 +425,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct
genl_info *info)
return -ENODEV;
if ((!phy->set_txpower && info->attrs[IEEE802154_ATTR_TXPOWER]) ||
- (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]))
+ (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]) ||
+ (!phy->set_cca_mode && info->attrs[IEEE802154_ATTR_CCA_MODE]))
goto out;
mutex_lock(&phy->pib_lock);
@@ -423,6 +443,12 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct
genl_info *info)
goto error;
}
+ if (info->attrs[IEEE802154_ATTR_CCA_MODE]) {
+ rc = phy_set_cca_mode(phy, info);
+ if (rc < 0)
+ goto error;
+ }
+
mutex_unlock(&phy->pib_lock);
wpan_phy_put(phy);
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index a09f642..d87c2c9 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -55,5 +55,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX
+ 1] = {
[IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, },
[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
+ [IEEE802154_ATTR_CCA_MODE] = { .type = NLA_U8, },
};
diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c
index 56338c8..4965e4c 100644
--- a/net/mac802154/ieee802154_dev.c
+++ b/net/mac802154/ieee802154_dev.c
@@ -185,6 +185,16 @@ static int mac802154_set_lbt(struct wpan_phy *phy, bool on)
return priv->ops->set_lbt(&priv->hw, on);
}
+static int mac802154_set_cca_mode(struct wpan_phy *phy, u8 mode)
+{
+ struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+ if (!priv->ops->set_cca_mode)
+ return -ENOTSUPP;
+
+ return priv->ops->set_cca_mode(&priv->hw, mode);
+}
+
struct ieee802154_dev *
ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
{
@@ -264,6 +274,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
priv->phy->del_iface = mac802154_del_iface;
priv->phy->set_txpower = mac802154_set_txpower;
priv->phy->set_lbt = mac802154_set_lbt;
+ priv->phy->set_cca_mode = mac802154_set_cca_mode;
rc = wpan_phy_register(priv->phy);
if (rc < 0)
--
1.9.0
------------------------------------------------------------------------------
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get your Android app in front of a whole new audience. Start now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
