Salut à tous,
suprise depuis ce matin, la partition montée sur /home de mon serveur
mutualisé est passée en lecture seule ! Je vous laisse imaginer les
inconvenients :(
Et pas moyen de la remonter en ecriture.
J'ai essayé la commande :
$ mount -t ext3 /dev/hde5 /home/ -o remount,rw
mais j'obtiens : "mount: block device /dev/hde5 is write-protected,
mounting read-only".
J'ai regardé dans /etc/fstab mais rien n'a pourtant changé. La colonne
"options" est "defaults" comme pour les autres partitions, j'ai aussi
essayé de mettre "rw" mais rien n'y fait.
Des idées ???
Merci d'avance ! :)
Dario
P.S. Ci dessous le résultat de : $ hdparm -I /dev/hde5
/dev/hde5:
ATA device, with non-removable media
Model Number: MAXTOR 6L040J2
Serial Number: 662207740131
Firmware Revision: AR1.0500
Standards:
Used: ATA/ATAPI-5 T13 1321D revision 1
Supported: 5 4 3 2 & some of 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78177792
device size with M = 1024*1024: 38172 MBytes
device size with M = 1000*1000: 40027 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
20min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
Checksum: correct
Linux-Azur : http://www.linux-azur.org
Désinscriptions: http://www.linux-azur.org/liste.php3
**** Pas de message au format HTML, SVP ****
