Le vendredi 15 décembre 2006 à 18:54 +0100, Ramses a écrit : > Excusez moi j'ai oublié de préciser > Gforce Go 7600 > Système ubuntu edgy > Driver Nvidia propriétaire installé
Avec ces détails, ça va mieux :) Je n'ai pas eu le temps de répondre au précédent mail, mais j'allais te demander si tu as le pilote propriétaire. > le double écran fonction lorsque le serveur X ne fonctionne pas. j'ai > essayé les différents tutoriels de la documentation d'Ubuntu. > Sans effet. > Ci dessous mon fichier Xorg.conf > @+ > Ramses Voyons un peu ça... > > Xorg.conf: > > # nvidia-xconfig: X configuration file generated by > nvidia-xconfig > # nvidia-xconfig: version 1.0 ([EMAIL PROTECTED]) Mon Oct > 16 22:13:07 PDT 2006 > > # /etc/X11/xorg.conf (xorg X Window System server configuration > file) > # > # This file was generated by dexconf, the Debian X Configuration > tool, using > # values from the debconf database. > # > # Edit this file with caution, and see the /etc/X11/xorg.conf > manual page. > # (Type "man /etc/X11/xorg.conf" at the shell prompt.) > # > # This file is automatically updated on xserver-xorg package > upgrades *only* > # if it has not been modified since the last upgrade of the > xserver-xorg > # package. > # > # If you have edited this file but would like it to be > automatically updated > # again, run the following command: > # sudo dpkg-reconfigure -phigh xserver-xorg > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" 0 0 > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > InputDevice "stylus" "SendCoreEvents" > InputDevice "cursor" "SendCoreEvents" > InputDevice "eraser" "SendCoreEvents" > InputDevice "Synaptics Touchpad" > EndSection > > Section "Files" > > # path to defoma fonts > FontPath "/usr/share/X11/fonts/misc" > FontPath "/usr/share/X11/fonts/cyrillic" > FontPath "/usr/share/X11/fonts/100dpi/:unscaled" > FontPath "/usr/share/X11/fonts/75dpi/:unscaled" > FontPath "/usr/share/X11/fonts/Type1" > FontPath "/usr/share/X11/fonts/100dpi" > FontPath "/usr/share/X11/fonts/75dpi" > FontPath > "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" > EndSection > > Section "Module" > Load "i2c" > Load "bitmap" > Load "ddc" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "type1" > Load "vbe" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "kbd" > Option "CoreKeyboard" > Option "XkbRules" "xorg" > Option "XkbModel" "pc105" > Option "XkbLayout" "fr" > Option "XkbVariant" "latin9" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/input/mice" > Option "Protocol" "ExplorerPS/2" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "true" > EndSection > > Section "InputDevice" > Identifier "Synaptics Touchpad" > Driver "synaptics" > Option "SendCoreEvents" "true" > Option "Device" "/dev/psaux" > Option "Protocol" "auto-dev" > Option "HorizScrollDelta" "0" > EndSection > > Section "InputDevice" > > > # /dev/input/event > # for USB > Identifier "stylus" > Driver "wacom" > Option "Device" "/dev/wacom" # Change to > Option "Type" "stylus" > Option "ForceDevice" "ISDV4" # Tablet > PC ONLY > EndSection > > Section "InputDevice" > > > # /dev/input/event > # for USB > Identifier "eraser" > Driver "wacom" > Option "Device" "/dev/wacom" # Change to > Option "Type" "eraser" > Option "ForceDevice" "ISDV4" # Tablet > PC ONLY > EndSection > > Section "InputDevice" > > > # /dev/input/event > # for USB > Identifier "cursor" > Driver "wacom" > Option "Device" "/dev/wacom" # Change to > Option "Type" "cursor" > Option "ForceDevice" "ISDV4" # Tablet > PC ONLY > EndSection > Je viens de voir des trucs Wacom... t'as une tablette graphique ou un truc dans le genre? > Section "Monitor" > Identifier "Écran générique" > HorizSync 28.0 - 72.0 > VertRefresh 43.0 - 60.0 > Option "DPMS" > EndSection > > Section "Device" > Identifier "NVIDIA Corporation NVIDIA Default Card" > Driver "nvidia" > EndSection > Là j'ai la preuve que tu utilises bien le driver Nvidia proprio, nickel :) > Section "Screen" > Identifier "Default Screen" > Device "NVIDIA Corporation NVIDIA Default Card" > Monitor "Écran générique" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1440x900" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1440x900" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1440x900" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1440x900" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1440x900" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1440x900" > EndSubSection > EndSection > 1440x900... ça sent la résolution 16/10. Question innocente, ton vidéoprojecteur permet-il cette résolution? De plus je ne vois aucune mention du TwinView dans ton fichier. Je pense qu'un truc du genre : Option "TwinView" "Clone" devrait apparaître. Essaie de mettre ton écran en 1024x768 (oui je sais, un si bel écran, c'est nul de le mettre dans cette résolution), puis active le bi-écran avec TwinView. Si tu l'as, lis la doc de ton vidéoprojecteur. Si jamais j'ai juste, et qu'il ne supporte pas ta résolution native (1440x900), tu peux toujours activer le mode "dual-head", dans ce cas ton bureau aura sa résolution et le vidéoprojecteur aura la sienne. Si tu maîtrise l'anglais, Nvidia fournit avec son pilote une documentation assez complète sur les options de xorg.conf qu'il apporte. Dans mon cas cette doc se trouve dans /usr/share/doc/nvidia-xxxx/README.txt , xxxx représentant le numéro de version du pilote. Si ce n'est pas le cas, tu peux trouver ce fichier via : "sudo updatedb" puis : "locate nvidia | grep -i readme.txt" Hope this helps :) -- Nils Ratusznik Linux user #339713 http://www.anotherhomepage.info Linux-Azur : http://www.linux-azur.org D�sinscriptions: http://www.linux-azur.org/liste.php3 **** Pas de message au format HTML, SVP ****
