Bonjour
L'ordinateur est le portable que j'emmène à chaque install party :) (hp
dv 9001 ea)
J'ai fait les premier test que m'a conseillé vincent Stehlé
Et place en pièce jointe le résultat de ceux ci.
Je les ai lancé sans avoir monté le disque dur à partir du live cd
ubuntu 64 bit.
Je dois admettre ne rien y comprendre et vous remercie du temps que vous
y passer.
@+
Ramses
Diffusez cette liste aupres de vos relations :)
Linux Azur : http://linux-azur.org
Se desabonner : http://linux-azur.org/liste.php3
*** Pas de message SMS, HTML ni de PJ SVP ***
[EMAIL PROTECTED]:~$ sudo fsck /dev/hda5
fsck 1.40.2 (12-Jul-2007)
e2fsck 1.40.2 (12-Jul-2007)
fsck.ext2: No such file or directory while trying to open /dev/hda5
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.2 series
Device Model: ST9120821AS
Serial Number: 5PL22Q5F
Firmware Version: 7.24
User Capacity: 120 034 123 776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Dec 2 09:31:16 2007 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 68) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always
- 0
3 Spin_Up_Time 0x0002 095 095 000 Old_age Always
- 0
4 Start_Stop_Count 0x0033 099 099 020 Pre-fail Always
- 1148
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always
- 56211023
9 Power_On_Hours 0x0032 097 097 000 Old_age Always
- 3371
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0033 099 099 020 Pre-fail Always
- 1220
187 Unknown_Attribute 0x0032 010 010 000 Old_age Always
- 90
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190 Temperature_Celsius 0x0022 045 037 045 Old_age Always
FAILING_NOW 43941822519
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 1074
193 Load_Cycle_Count 0x0032 038 038 000 Old_age Always
- 125987
194 Temperature_Celsius 0x0022 055 063 000 Old_age Always
- 55 (Lifetime Min/Max 0/15)
195 Hardware_ECC_Recovered 0x001a 061 048 000 Old_age Always
- 185263140
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 109 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 109 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 97 11 e8 Error: UNC at LBA = 0x08119748 = 135370568
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 48 97 11 e8 00 00:10:25.652 READ DMA
ec 00 00 00 00 00 a0 00 00:10:25.648 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:25.641 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:10:21.241 IDENTIFY DEVICE
c8 00 04 48 97 11 e8 00 00:10:21.232 READ DMA
Error 108 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 97 11 e8 Error: UNC at LBA = 0x08119748 = 135370568
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 48 97 11 e8 00 00:10:25.652 READ DMA
ec 00 00 00 00 00 a0 00 00:10:25.648 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:25.641 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:10:21.241 IDENTIFY DEVICE
c8 00 04 48 97 11 e8 00 00:10:21.232 READ DMA
Error 107 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 97 11 e8 Error: UNC at LBA = 0x08119748 = 135370568
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 48 97 11 e8 00 00:10:25.652 READ DMA
ec 00 00 00 00 00 a0 00 00:10:25.648 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:25.641 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:10:21.241 IDENTIFY DEVICE
c8 00 04 48 97 11 e8 00 00:10:21.232 READ DMA
Error 106 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 97 11 e8 Error: UNC at LBA = 0x08119748 = 135370568
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 48 97 11 e8 00 00:10:10.154 READ DMA
ec 00 00 00 00 00 a0 00 00:10:10.145 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:10.126 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:10:21.241 IDENTIFY DEVICE
c8 00 04 48 97 11 e8 00 00:10:21.232 READ DMA
Error 105 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 97 11 e8 Error: UNC at LBA = 0x08119748 = 135370568
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 48 97 11 e8 00 00:10:10.154 READ DMA
ec 00 00 00 00 00 a0 00 00:10:10.145 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:10.126 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:10:10.118 IDENTIFY DEVICE
c8 00 04 48 97 11 e8 00 00:10:07.898 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 3371 -
# 2 Extended offline Completed without error 00% 3328 -
# 3 Short offline Completed without error 00% 3327 -
# 4 Short offline Aborted by host 80% 3327 -
# 5 Extended offline Completed without error 00% 2580 -
# 6 Short offline Completed without error 00% 2579 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
