Hola: Estoy usando un adaptador USB-WiFi Dlink WUA-2340, con ndiswrapper, en Ubuntu 8.04, con un kernel 2.6.24-23-server. Cuando prendo la maquina (cold reboot), el adaptador funciona OK (se conecta al acces point, obtiene la IP del servidor DHCP, etc). Sin embargo, si hago un warm reboot ($sudo reboot), el adaptador desaparece. Mas abajo estan los mensajes que obtengo despued de un warm reboot y despues de un cold reboot.
He buscado usando el mensaje de error, pero no encontre nada. Alguna pista de como arreglar el problema? Despues de un warm reboot [ 38.012922] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 38.160905] usb 2-2: reset high speed USB device using ehci_hcd and address 3 [ 38.338829] ndiswrapper: driver neta5agu (D-Link,05/08/2006,1.5.202.2) loaded [ 38.357166] ndiswrapper (ZwQueryValueKey:2358): not fully implemented (yet) [ 53.420191] ndiswrapper (NdisWriteErrorLogEntry:191): log: C0001389, count: 4, return_address: e06339fb [ 53.440051] ndiswrapper (NdisWriteErrorLogEntry:194): code: 0xde49f000 [ 53.456864] ndiswrapper (NdisWriteErrorLogEntry:194): code: 0x28 [ 53.473025] ndiswrapper (NdisWriteErrorLogEntry:194): code: 0xe04ed000 [ 53.489572] ndiswrapper (NdisWriteErrorLogEntry:194): code: 0xe04ed000 [ 53.506185] ndiswrapper (mp_init:216): couldn't initialize device: C0000001 [ 53.522992] ndiswrapper (pnp_start_device:439): Windows driver couldn't initialize the devic e (C0000001) [ 53.542475] ndiswrapper (mp_halt:259): device de5a1480 is not initialized - not halting [ 53.560410] ndiswrapper: device eth%d removed [ 53.574640] ndiswrapper: probe of 2-2:1.0 failed with error -22 [ 53.590504] usbcore: registered new interface driver ndiswrapper Despues de un cold reboot [ 27.866766] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 28.019575] usb 2-2: reset high speed USB device using ehci_hcd and address 3 [ 28.197421] ndiswrapper: driver neta5agu (D-Link,05/08/2006,1.5.202.2) loaded [ 28.215781] ndiswrapper (ZwQueryValueKey:2358): not fully implemented (yet) [ 28.879462] wlan0: ethernet device 00:1e:58:97:a2:2c using NDIS driver: neta5agu, version: 0 x10005, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 07D1:3A08.F.conf [ 28.969486] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP w ith WPA, WPA2, WPA2PSK [ 28.991254] usbcore: registered new interface driver ndiswrapper Alejandro.
