Recomendado: Colocar el parametro HWADDR= y le colocas la MAC de la interfaz.
Atte.. -- Jorge Palma Escobar Ingeniero de Sistemas Red Hat Linux Certified Engineer Certificate Nº 804005089418233 2009/6/12 Juan Andres Ramirez <jandresa...@gmail.com>: > Hola chicos: > Tengo una máquina con Centos 5.3, y le puse 2 tarjetas D-link > Gigabit con full duplex etc....el sistema las reconoce sin problemas, > hago el bonding de la siguiente manera: > > configure los sigiuentes archivos: > > /etc/modprobe.conf: > > alias bond0 bonding miimon=250 mode=0 > > los archivos de las interfaces: > DEVICE=bond0 > agregué direccion ip puerta enlace etc.... > > > ifcfg-eth0: > DEVICE:eth0 > MASTER=bond > SLAVE=yes > ONBOOT=yes > BOOTPROTO=none > TYPE=Ethernet > USERCTL=no > > Lo mismo para la eth1. > > Reinicio la red y me envia el siguiente mensaje > bonding: bond0: Warning: the permanent HWaddr of eth0 - > 00:17:31:AD:53:BB - is still in use by bond0. Set the HWaddr of eth0 > to a different > address to avoid conflicts. > > Lo que produce que no tenga full duplex la eth0 quede desabilitada y > la velocidad sea de maximo 100 del bond0. > > Cualquier sugerencia siempre es bienvenida, muchas gracias. > >