je suis en train d'essayer avec un noyau 2.4.0. Je te tiens au courant merci
Jerome Warnier wrote: > Gaucher.Philippe wrote: > > > Bonjour, > > J'ai install� une carte Ethernet D-Link DFE530TX pour faire de l'ADSL > > sur un PC. > > Avec la Suse 7.1, j'ai install� le module Via-Rhine, mais j'ai > > l'impression que le noyau ne reconnait pas la carte. > > Quand je lance ifconfig, j'ai le message: > > > > linux:~ # ifconfig > > dummy0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 > > > > inet addr:10.1.1.1 Bcast:10.255.255.255 Mask:255.255.255.255 > > UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > > > eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 > > inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:100 > > Interrupt:11 Base address:0xdc00 > > > > lo Link encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > UP LOOPBACK RUNNING MTU:3924 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > > > et quand je lance pppoe (pour l'ADSL), j'ai: > > > > linux:~ # start-pppoe > > Using interface ppp0 > > Connect: ppp0 <--> /dev/pts/2 > > sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x5f7efaf0> > > <pcomp>] > > sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x5f7efaf0> > > <pcomp>] > > sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x5f7efaf0> > > <pcomp>] > > sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x5f7efaf0> > > <pcomp>] > > sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x5f7efaf0> > > <pcomp>] > > Modem hangup > > Connection terminated. > > Script /usr/local/bin/pppoed -I eth0 finished (pid 604), status = > > 0x100 > > linux:~ # stop-pppoe > > Cannot find PID to stop. > > > > Je ne comprend pas ce qui cloche dans ma config....Quelqu'un peut il > > ma'aider? > > Merci d'avance > > PS: la carte marche bien sous Win98. > > > > > > > > -- > > ********************************* > > Philippe GAUCHER > > GIF SUR YVETTE, FRANCE > > e-mail: > > - perso:[EMAIL PROTECTED] > > - office: [EMAIL PROTECTED] > > web: http://www.teaser.fr/~pgaucher > > ********************************* > > > > > > > > [ Soyez pr�cis dans vos sujets svp afin de d�terminer directement ] > > [ le type de demande... ] > > [ Pour vous (d�s)inscrire, aller sur http://linuxbe.org/ml.php ] > > [ http://LinuxBe.org Contact: [EMAIL PROTECTED] ] > > > > > J'ai d�j� eu le probl�me et le verdict est que la DFE530TX (mais pas les > mod�les inf�rieurs) et � base de Via Rhine II, non support� par le > driver kernel standard (au moins jusque 2.2.16) via-rhine. Pas de > solution � part d'upgrader ton kernel (mais je sais pas quelle version > au minimum). > > D�sol� > > [ Soyez pr�cis dans vos sujets svp afin de d�terminer directement ] > [ le type de demande... ] > [ Pour vous (d�s)inscrire, aller sur http://linuxbe.org/ml.php ] > [ http://LinuxBe.org Contact: [EMAIL PROTECTED] ] -- ********************************* Philippe GAUCHER GIF SUR YVETTE, FRANCE e-mail: - perso:[EMAIL PROTECTED] - office: [EMAIL PROTECTED] web: http://www.teaser.fr/~pgaucher ********************************* [ Soyez pr�cis dans vos sujets svp afin de d�terminer directement ] [ le type de demande... ] [ Pour vous (d�s)inscrire, aller sur http://linuxbe.org/ml.php ] [ http://LinuxBe.org Contact: [EMAIL PROTECTED] ]
