Bonjour,
J'ai suivi tes conseils � la lettre .Il ya eu quelque probl�mes pour repasser
en init 5 je n'ai pu le faire qu'en rebootant m�on syst�me .
Je me retrouve � pr�sent avec 2 fichiers XF86Config et je n'ai plus de 3D ?
les jeux qui fonctionnait ne d�marre plus ni les ecrans de veille GL.
Je te joint mes 2 XF86 config et /etc /modules.conf et /var/log /XFree86.0.log
J'ai eu du mal � retenir les messages d'erreur et je ne sais pas comment
imptimer en mode console?
Merci de ta patience et de ton aide
Jacques
Le Mardi 21 Ao�t 2001 23:30, vous avez �crit :
> On Tue, Aug 21, 2001 at 07:03:39PM +0200, Jacques wrote:
> > Bonsoir,et merci � Pascal,Remi,Philippe...
> > J'ai suivi tes instructions et les correctifs de Pascal Bleser concernant
> > le point 2 .L'ecran c'est mis au noir et j'ai red�marrer mon
> > syst�me(reset). Au d�marrage suivant impossible de passer � init 5 et
> > donc de d�marrer X J'ai remis les fichier XF86Config dans son etat
> > d'origine et j'ai pu red�marrer normalement.
> > Je ne comprend pas bien � quoi sert ce NvAgp que tu m'as propos�
> > d'ajouter sur mon XF86Config !
> > Peut tu m'�clairer et tu as une autre id�e concernant mon probl�me.
> > En tout cas merci
>
> Reprenons :
>
> * Red�marre ta machine sans X (default runlevel 3 ou 2)
> * logge toi sous root
> * tapes : modprobe agpgart (messages d'erreur ?)
> * v�rifie avec dmesg que le module agpgart est bien charg� et qu'il
> fonctionne Moi j'ai :
>
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 96M
> agpgart: Detected Via Apollo Pro KX133 chipset
> agpgart: AGP aperture is 64M @ 0xd8000000
> NVRM: AGPGART: VIA Apollo KX133 chipset
> NVRM: AGPGART: aperture: 64M @ 0xd8000000
> NVRM: AGPGART: aperture mapped from 0xd8000000 to 0xcd9dc000
> NVRM: AGPGART: mode 4x
> NVRM: AGPGART: allocated 16 pages
>
> * Tant qu'on y est, pour �tre s�r que c'est pas un probl�me de config de
> modprobe, tapes modprobe NVdriver
> * v�rifie avec dmesg :
> NVRM: loading NVIDIA kernel module version 1.0-1251
>
> Si tout va bien, ton kernel est bon.
>
> * dans XF86Config, section "Device", ajoute :
> Option "NvAGP" "2"
>
> Il est important de faire cela sans que X n'ait d�marr� sur la machine
> depuis le reboot pr�c�dent.
>
> Tu es pr�t � d�marrer X.
> * logge-toi sous ton user (en console)
> * tappe startx (juste pour voir si X d�marre)
>
> Si �a ne marche pas : envoie les messages d'erreur et XF86Config.
> Si �a marche : reboote en runlevel 5 pour voir si maintenant �a marche,
> sinon envoie /etc/modules.conf et /var/log/XFree86.0.log (ou ce qui s'en
> rapproche)
>
> Bonne chance,
#--------#
# �� SaX generated XFree86 config file ��
# Created on: 2001-08-20.
#
# Version: 4.3
# Contact: Marcus Schaefer <[EMAIL PROTECTED]>, 2001
#
# Automatically generated by SaX2 (4.3)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/japanese"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "speedo"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbKeyCodes" "xfree86"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "5"
Option "Device" "/dev/psaux"
Option "Name" "AutoDetected"
Option "Protocol" "imps/2"
Option "Vendor" "AutoDetected"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
HorizSync 30-70
Identifier "Monitor[0]"
ModelName "AutoDetected"
VendorName "AutoDetected"
VertRefresh 50-93
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 27.96 640 656 720 864 480 480 485 501
Modeline "800x600" 43.68 800 816 928 1072 600 600 606 626
Modeline "1024x768" 74.45 1024 1040 1216 1400 768 768 778 802
Modeline "1024x768" 84.65 1024 1040 1216 1400 768 768 778 802
Modeline "1024x768" 92.96 1024 1040 1216 1400 768 768 778 802
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "640x480" "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "AutoDetected"
Driver "nvidia"
Identifier "Device[0]"
Option "dpms"
Option "NvAgp" "2"
VendorName "AutoDetected"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
#--------#
# �� SaX generated XFree86 config file ��
# Created on: 2001-08-20.
#
# Version: 4.3
# Contact: Marcus Schaefer <[EMAIL PROTECTED]>, 2001
#
# Automatically generated by SaX2 (4.3)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/japanese"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "speedo"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbKeyCodes" "xfree86"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "5"
Option "Device" "/dev/psaux"
Option "Name" "AutoDetected"
Option "Protocol" "imps/2"
Option "Vendor" "AutoDetected"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
HorizSync 30-70
Identifier "Monitor[0]"
ModelName "AutoDetected"
VendorName "AutoDetected"
VertRefresh 50-93
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 27.96 640 656 720 864 480 480 485 501
Modeline "800x600" 43.68 800 816 928 1072 600 600 606 626
Modeline "1024x768" 74.45 1024 1040 1216 1400 768 768 778 802
Modeline "1024x768" 84.65 1024 1040 1216 1400 768 768 778 802
Modeline "1024x768" 92.96 1024 1040 1216 1400 768 768 778 802
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "640x480" "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "AutoDetected"
Driver "nvidia"
Identifier "Device[0]"
Option "dpms"
VendorName "AutoDetected"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
#
# Copyright (c) 1996-2000 SuSE GmbH Nuernberg, Germany. All rights reserved.
#
# Author: Hubert Mantel <[EMAIL PROTECTED]>, 1996-2000
#
# Configuration file for loadable modules; used by modprobe and kerneld
#
# Aliases - specify your hardware
alias eth0 off
alias eth1 off
alias tr0 off
alias scsi_hostadapter off
alias fb0 off
# only used for Mylex or Compaq Raid as module
alias block-major-48 off
alias block-major-49 off
alias block-major-72 off
alias block-major-73 off
# only needed for fifth and sixth IDE adaptor
alias block-major-56 off
alias block-major-57 off
# mouse (for older busmice)
alias char-major-10 off
# If you want to use the new autofs4
# alias autofs autofs4
# For parallel port devices, uncomment the following two lines and change
# "frpw" to the protocol type you use
# post-install paride insmod frpw
# pre-remove paride rmmod frpw
#*****************************************************************************
# If you want to use the kernel sound drivers instead of ALSA (SuSE's default
# sound solution) please put comment signs in front of the following
# entries and remove any previous ALSA configuration from YaST2 or alsaconf
# from the end of this file. Then choose one of the sample configurations
# below. Uncomment all lines starting with 'alias', 'options', pre- or post-
# install' within one configuration and modify the parameters according to
# your needs (e.g. the resources chosen for this device in /etc/isapnp.conf).
#*****************************************************************************
alias char-major-14 off
alias sound off
alias midi off
#*****************************************************************************
# module : ad1816.o AD1816 chip
#
# Supported cards :
#
# Terratec Base 1/64
# HP Kayak
# Acer FX-3D
# SY-1816
# Highscreen Sound-Boostar 32 Wave 3D
# Highscreen Sound-Boostar 16
#
# Documentation available in /usr/src/linux/Documentation/sound/AD1816
# and in /usr/src/linux/drivers/sound/ad1816.c .
#
# Possible configuration :
#
# alias char-major-14 ad1816
# post-install ad1816 modprobe "-k" opl3
# post-install ad1816 modprobe "-k" mpu401
# options ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
# options opl3 io=0x0388
# options mpu401 io=0x0330 irq=9
#
#*****************************************************************************
# module : ad1848.o AD1848/CS4231/CS4248 Chip
# --> Windows Sound System (MSS/WSS)
#
# A variety of common ISA soundcards are
# compatible with this family of chips.
#
# Documentation available in /usr/src/linux/drivers/sound/ad1848.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/README.OSS .
# Usually this module is used in conjunction with other higher level sound
# modules.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 ad1848
# options ad1848 io=0x530 irq=7 dma=0 dma2=3
#
#*****************************************************************************
# module : cs4232.o Crystal 423x chipsets
#
# Documentation available in /usr/src/linux/drivers/sound/cs4232.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/CS4232 . This
# chip is often used together with other sound hardware.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 cs4232
# post-install cs4232 modprobe "-k" opl3
# options cs4232 io=0x534 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
# options opl3 io=0x388
#
#*****************************************************************************
# module : es1370.o Ensoniq 1370 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1370 and
# /usr/src/linux/drivers/sound/es1370.c .
#
# alias char-major-14 es1370
# options es1370 joystick=1
#
#*****************************************************************************
# module : es1371.o Creative Ensoniq 1371 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1371 and
# /usr/src/linux/drivers/sound/es1371.c .
#
# alias char-major-14 es1371
# options es1371 joystick=0x200
#
#*****************************************************************************
# module : mad16.o MAD16
#
# Possible configuration :
#
# alias char-major-14 mad16
# options sb mad16=1
# options mad16 io=0x530 irq=7 dma=0 dma16=1
#
#*****************************************************************************
# module : sb.o Soundblaster 16, SB Pro + Clones
# Also needed for AWE32/64
#
# Dcoumentation available in /usr/src/linux/Documentation/sound/Soundblaster
# and in /usr/src/linux/drivers/sound/sb.c .
#
# Possible configuration :
#
# alias char-major-14 sb
# post-install sb /sbin/modprobe "-k" "adlib_card"
# options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330
# options adlib_card io=0x388
#
#*****************************************************************************
# module : trix.o MediaTrix AudioTrix Pro
#
# alias char-major-14 trix
# pre-install trix modprobe "-k"
#
#*****************************************************************************
# module : wavefront.o Turtle Beach Maui, Tropez, Tropez Plus
#
# Comment from /usr/src/linux/Documentation/sound/Wavefront :
# (please read that file !)
# "the wavefront options "io" and "irq" ***MUST*** match the "synthio"
# and "synthirq" cs4232 options."
#
# Possible configuration :
#
# alias char-major-14 wavefront
# alias synth0 wavefront
# alias mixer0 cs4232
# alias audio0 cs4232
# pre-install wavefront modprobe "-k" "cs4232"
# post-install wavefront modprobe "-k" "opl3"
# options wavefront io=0x200 irq=9
# options cs4232 synthirq=9 synthio=0x200 io=0x530 irq=5 dma=1 dma2=0
# options opl3 io=0x388
#
#*****************************************************************************
#*****************************************************************************
# Example configs for ALSA
# You don't need to run isapnp with ALSA, it has full PnP support.
# See /usr/share/doc/packages/alsa/README.SuSE
#*****************************************************************************
#
# ALSA native device support and OSS emulation support. Uncomment these
# lines to enable ALSA:
#
# alias char-major-14 soundcore
# alias char-major-116 snd
# alias sound-slot-0 snd-card-0
# alias sound-service-0-0 snd-mixer-oss
# alias sound-service-0-1 snd-seq-oss
# alias sound-service-0-3 snd-pcm-oss
# alias sound-service-0-8 snd-seq-oss
# alias sound-service-0-12 snd-pcm-oss
#
# Uncomment this line too, you can setup your ALSA device permissions here:
#
# options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0666 snd_device_gid=17
snd_device_uid=0
#
# ALSA Card examples:
#
# Creative SB16 PnP (ALSA will do isapnp itself per default):
#
# alias snd-card-0 snd-card-sb16
# options snd-card-sb16 snd_index=0
#
# Creative SB Live! (ALSA will find it with the kernel's PCI support):
#
# alias snd-card-0 snd-card-emu10k1
# options snd-card-emu10k1 snd_index=0
#
# An other Example: IBM ThinkPad 600E with an CS423x emulated by an CS4610/11
# In this case, the native PCI Sound is expected to not work, but some chips
# like the CS4610/11 have a very good emulation for older ISA non-PNP cards
# like the CS423x family. The CS4610/11 e.g. has an good emulation of the
# CS4231/2 cards and the CS4239 card, the snd-card-cs4236 e.g. supports the
# CS4239 emulation of the CS4610/11 in the IBM ThinkPad 600E:
#
# alias snd-card-0 snd-card-cs4236
# options snd-card-cs4236 snd_index=0 snd_port=0x530 snd_cport=0x538 snd_irq=5
snd_dma1=1 snd_dma2=0 snd_isapnp=0
#
# You MUST suppy all required snd_port, snd_irq and snd_dma parameter AND
# the snd_isapnp=0 option to the snd-card if the card is not shown by pnpdump,
# otherwise the ALSA driver will try to do PnP and will not find your card.
#
# This is an example of an post-install you may want use:
#
# post-install snd amixer set Master 100% unmute;amixer set PCM 100% unmute; amixer
set Aux,1 100% unmute
# (Aux,1 is the CDROM line-in in this ThinkPad 600E)
#
# For more info about the powerful amixer look into "man amixer".
#
# This will open your mixer channels in case you did not store a mixer setup
# for your card in /etc/asound.conf and you will have a default configuration.
# To test your new setup, do:
#
# depmod -a
# rcalsasound restart
#
# If the modules were loaded, you can check them with lsmod.
#
# Open and unmute the mixer channels, e.g. with alsamixer, gamix or your
# OSS mixer (alsamixer: unmute the Master and PCM channels with ",." and
# raise them with the up/down-arrow keys, man alsamixer explains all the keys)
#
# To play a sound sample run:
#
# aplay /usr/share/sounds/alsa/whistle.au
#
# For a list of supported soundcards look into
# /usr/share/doc/packages/alsa/cards.txt
# and browse the other files there and www.alsa-project.org
# for more information.
#*****************************************************************************
########################################################################
# Options; these are examples; uncommented and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0
isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
# options tuner type=0
# options msp3400 once=1 simple=1
# post-install bttv /sbin/modprobe "-k" tuner; # /sbin/modprobe "-k"
msp3400
options dummy0 -o dummy0
options dummy1 -o dummy1
# cipe section
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_debug=0 cipe_maxdev=2
# block dev aliases
alias block-major-1 rd
alias block-major-2 floppy
alias block-major-3 off
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
alias block-major-22 off
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
alias block-major-33 off
alias block-major-34 off
# network block device
alias block-major-43 off
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
alias char-major-10-135 off
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-240 agpgarti810
alias char-major-15 off
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
# fb
alias char-major-29 off
alias char-major-30 iBCS
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
alias char-major-43 off
alias char-major-44 off
alias char-major-45 off
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 bttv
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89 i2c-dev
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
if `kernelversion` == "2.2"
alias char-major-144 pppox
post-install pppox insmod mssclampfw
pre-remove pppox rmmod mssclampfw
else
alias char-major-108 ppp_async
alias char-major-144 pppoe
alias net-pf-24 pppoe
endif
# IrDA
alias char-major-161 ircomm-tty
# USB
alias char-major-166 acm
# Moxa Multiport Serial Boards
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias char-major-195 NVdriver
alias char-major-206 osst
alias char-major-240 usb-serial
alias binfmt-332 iBCS
alias binfmt-518 iBCS
alias binfmt-002c iBCS
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
alias tty-ldisc-7 off
# IrDA
alias tty-ldisc-11 irtty
# alias ax0 mkiss
alias ax0 off
# alias sp0 6pack
alias sp0 off
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
if `kernelversion` == "2.2"
alias ppp0 ppp
alias ppp1 ppp
alias tty-ldisc-3 ppp
else
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
endif
alias plip0 plip
alias plip1 plip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# alias net-pf-3 off
alias net-pf-4 ipx
# alias net-pf-4 off
alias net-pf-5 appletalk
# alias net-pf-5 off
alias net-pf-6 netrom
# alias net-pf-6 off
alias net-pf-10 ipv6
# alias net-pf-10 off
alias net-pf-11 rose
# alias net-pf-11 off
alias net-pf-17 af_packet
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
pre-install mga modprobe "-k" "agpgart"
pre-install r128 modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# end of common part for modules.conf
# begin of i386 part for modules.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwavedd
# options mwavedd dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# end of i386 part for modules.conf
# Added by YaST2, do not change
alias usb-hostadapter usb-uhci
# End of YaST2 additions
#
# YaST2: sound cards support
#
alias char-major-116 snd
options snd snd_cards_limit=1 snd_major=116
alias snd-card-0 snd-card-cmipci
options snd-card-cmipci snd_id=card1 snd_index=0
#
# YaST2: sound system dependent part
#
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss
#
# Copyright (c) 1996-2000 SuSE GmbH Nuernberg, Germany. All rights reserved.
#
# Author: Hubert Mantel <[EMAIL PROTECTED]>, 1996-2000
#
# Configuration file for loadable modules; used by modprobe and kerneld
#
# Aliases - specify your hardware
alias eth0 off
alias eth1 off
alias tr0 off
alias scsi_hostadapter off
alias fb0 off
# only used for Mylex or Compaq Raid as module
alias block-major-48 off
alias block-major-49 off
alias block-major-72 off
alias block-major-73 off
# only needed for fifth and sixth IDE adaptor
alias block-major-56 off
alias block-major-57 off
# mouse (for older busmice)
alias char-major-10 off
# If you want to use the new autofs4
# alias autofs autofs4
# For parallel port devices, uncomment the following two lines and change
# "frpw" to the protocol type you use
# post-install paride insmod frpw
# pre-remove paride rmmod frpw
#*****************************************************************************
# If you want to use the kernel sound drivers instead of ALSA (SuSE's default
# sound solution) please put comment signs in front of the following
# entries and remove any previous ALSA configuration from YaST2 or alsaconf
# from the end of this file. Then choose one of the sample configurations
# below. Uncomment all lines starting with 'alias', 'options', pre- or post-
# install' within one configuration and modify the parameters according to
# your needs (e.g. the resources chosen for this device in /etc/isapnp.conf).
#*****************************************************************************
alias char-major-14 off
alias sound off
alias midi off
#*****************************************************************************
# module : ad1816.o AD1816 chip
#
# Supported cards :
#
# Terratec Base 1/64
# HP Kayak
# Acer FX-3D
# SY-1816
# Highscreen Sound-Boostar 32 Wave 3D
# Highscreen Sound-Boostar 16
#
# Documentation available in /usr/src/linux/Documentation/sound/AD1816
# and in /usr/src/linux/drivers/sound/ad1816.c .
#
# Possible configuration :
#
# alias char-major-14 ad1816
# post-install ad1816 modprobe "-k" opl3
# post-install ad1816 modprobe "-k" mpu401
# options ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
# options opl3 io=0x0388
# options mpu401 io=0x0330 irq=9
#
#*****************************************************************************
# module : ad1848.o AD1848/CS4231/CS4248 Chip
# --> Windows Sound System (MSS/WSS)
#
# A variety of common ISA soundcards are
# compatible with this family of chips.
#
# Documentation available in /usr/src/linux/drivers/sound/ad1848.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/README.OSS .
# Usually this module is used in conjunction with other higher level sound
# modules.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 ad1848
# options ad1848 io=0x530 irq=7 dma=0 dma2=3
#
#*****************************************************************************
# module : cs4232.o Crystal 423x chipsets
#
# Documentation available in /usr/src/linux/drivers/sound/cs4232.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/CS4232 . This
# chip is often used together with other sound hardware.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 cs4232
# post-install cs4232 modprobe "-k" opl3
# options cs4232 io=0x534 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
# options opl3 io=0x388
#
#*****************************************************************************
# module : es1370.o Ensoniq 1370 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1370 and
# /usr/src/linux/drivers/sound/es1370.c .
#
# alias char-major-14 es1370
# options es1370 joystick=1
#
#*****************************************************************************
# module : es1371.o Creative Ensoniq 1371 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1371 and
# /usr/src/linux/drivers/sound/es1371.c .
#
# alias char-major-14 es1371
# options es1371 joystick=0x200
#
#*****************************************************************************
# module : mad16.o MAD16
#
# Possible configuration :
#
# alias char-major-14 mad16
# options sb mad16=1
# options mad16 io=0x530 irq=7 dma=0 dma16=1
#
#*****************************************************************************
# module : sb.o Soundblaster 16, SB Pro + Clones
# Also needed for AWE32/64
#
# Dcoumentation available in /usr/src/linux/Documentation/sound/Soundblaster
# and in /usr/src/linux/drivers/sound/sb.c .
#
# Possible configuration :
#
# alias char-major-14 sb
# post-install sb /sbin/modprobe "-k" "adlib_card"
# options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330
# options adlib_card io=0x388
#
#*****************************************************************************
# module : trix.o MediaTrix AudioTrix Pro
#
# alias char-major-14 trix
# pre-install trix modprobe "-k"
#
#*****************************************************************************
# module : wavefront.o Turtle Beach Maui, Tropez, Tropez Plus
#
# Comment from /usr/src/linux/Documentation/sound/Wavefront :
# (please read that file !)
# "the wavefront options "io" and "irq" ***MUST*** match the "synthio"
# and "synthirq" cs4232 options."
#
# Possible configuration :
#
# alias char-major-14 wavefront
# alias synth0 wavefront
# alias mixer0 cs4232
# alias audio0 cs4232
# pre-install wavefront modprobe "-k" "cs4232"
# post-install wavefront modprobe "-k" "opl3"
# options wavefront io=0x200 irq=9
# options cs4232 synthirq=9 synthio=0x200 io=0x530 irq=5 dma=1 dma2=0
# options opl3 io=0x388
#
#*****************************************************************************
#*****************************************************************************
# Example configs for ALSA
# You don't need to run isapnp with ALSA, it has full PnP support.
# See /usr/share/doc/packages/alsa/README.SuSE
#*****************************************************************************
#
# ALSA native device support and OSS emulation support. Uncomment these
# lines to enable ALSA:
#
# alias char-major-14 soundcore
# alias char-major-116 snd
# alias sound-slot-0 snd-card-0
# alias sound-service-0-0 snd-mixer-oss
# alias sound-service-0-1 snd-seq-oss
# alias sound-service-0-3 snd-pcm-oss
# alias sound-service-0-8 snd-seq-oss
# alias sound-service-0-12 snd-pcm-oss
#
# Uncomment this line too, you can setup your ALSA device permissions here:
#
# options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0666 snd_device_gid=17
snd_device_uid=0
#
# ALSA Card examples:
#
# Creative SB16 PnP (ALSA will do isapnp itself per default):
#
# alias snd-card-0 snd-card-sb16
# options snd-card-sb16 snd_index=0
#
# Creative SB Live! (ALSA will find it with the kernel's PCI support):
#
# alias snd-card-0 snd-card-emu10k1
# options snd-card-emu10k1 snd_index=0
#
# An other Example: IBM ThinkPad 600E with an CS423x emulated by an CS4610/11
# In this case, the native PCI Sound is expected to not work, but some chips
# like the CS4610/11 have a very good emulation for older ISA non-PNP cards
# like the CS423x family. The CS4610/11 e.g. has an good emulation of the
# CS4231/2 cards and the CS4239 card, the snd-card-cs4236 e.g. supports the
# CS4239 emulation of the CS4610/11 in the IBM ThinkPad 600E:
#
# alias snd-card-0 snd-card-cs4236
# options snd-card-cs4236 snd_index=0 snd_port=0x530 snd_cport=0x538 snd_irq=5
snd_dma1=1 snd_dma2=0 snd_isapnp=0
#
# You MUST suppy all required snd_port, snd_irq and snd_dma parameter AND
# the snd_isapnp=0 option to the snd-card if the card is not shown by pnpdump,
# otherwise the ALSA driver will try to do PnP and will not find your card.
#
# This is an example of an post-install you may want use:
#
# post-install snd amixer set Master 100% unmute;amixer set PCM 100% unmute; amixer
set Aux,1 100% unmute
# (Aux,1 is the CDROM line-in in this ThinkPad 600E)
#
# For more info about the powerful amixer look into "man amixer".
#
# This will open your mixer channels in case you did not store a mixer setup
# for your card in /etc/asound.conf and you will have a default configuration.
# To test your new setup, do:
#
# depmod -a
# rcalsasound restart
#
# If the modules were loaded, you can check them with lsmod.
#
# Open and unmute the mixer channels, e.g. with alsamixer, gamix or your
# OSS mixer (alsamixer: unmute the Master and PCM channels with ",." and
# raise them with the up/down-arrow keys, man alsamixer explains all the keys)
#
# To play a sound sample run:
#
# aplay /usr/share/sounds/alsa/whistle.au
#
# For a list of supported soundcards look into
# /usr/share/doc/packages/alsa/cards.txt
# and browse the other files there and www.alsa-project.org
# for more information.
#*****************************************************************************
########################################################################
# Options; these are examples; uncommented and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0
isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
# options tuner type=0
# options msp3400 once=1 simple=1
# post-install bttv /sbin/modprobe "-k" tuner; \
# /sbin/modprobe "-k" msp3400
options dummy0 -o dummy0
options dummy1 -o dummy1
# cipe section
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_maxdev=2 cipe_debug=0
# block dev aliases
alias block-major-1 rd
alias block-major-2 floppy
alias block-major-3 off
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
alias block-major-22 off
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
alias block-major-33 off
alias block-major-34 off
# network block device
alias block-major-43 off
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
alias char-major-10-135 off
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-240 agpgarti810
alias char-major-15 off
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
alias char-major-29 off # fb
alias char-major-30 iBCS
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
alias char-major-43 off
alias char-major-44 off
alias char-major-45 off
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 bttv
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89 i2c-dev
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
if `kernelversion` == "2.2"
alias char-major-144 pppox
post-install pppox insmod mssclampfw
pre-remove pppox rmmod mssclampfw
else
alias char-major-108 ppp_async
alias char-major-144 pppoe
alias net-pf-24 pppoe
endif
# IrDA
alias char-major-161 ircomm-tty
# USB
alias char-major-166 acm
# Moxa Multiport Serial Boards
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias char-major-195 NVdriver
alias char-major-206 osst
alias char-major-240 usb-serial
alias binfmt-332 iBCS
alias binfmt-518 iBCS
alias binfmt-002c iBCS
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
alias tty-ldisc-7 off
# IrDA
alias tty-ldisc-11 irtty
# alias ax0 mkiss
alias ax0 off
# alias sp0 6pack
alias sp0 off
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
if `kernelversion` == "2.2"
alias ppp0 ppp
alias ppp1 ppp
alias tty-ldisc-3 ppp
else
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
endif
alias plip0 plip
alias plip1 plip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# alias net-pf-3 off
alias net-pf-4 ipx
# alias net-pf-4 off
alias net-pf-5 appletalk
# alias net-pf-5 off
alias net-pf-6 netrom
# alias net-pf-6 off
alias net-pf-10 ipv6
# alias net-pf-10 off
alias net-pf-11 rose
# alias net-pf-11 off
alias net-pf-17 af_packet
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
pre-install mga modprobe "-k" "agpgart"
pre-install r128 modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# end of common part for modules.conf
# begin of i386 part for modules.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwavedd
# options mwavedd dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# end of i386 part for modules.conf
# Added by YaST2, do not change
alias usb-hostadapter usb-uhci
# End of YaST2 additions
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: SuSE Linux [ELF] SuSE
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Aug 22 10:45:33 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[0]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[0]"
(**) |-->Input Device "Keyboard[0]"
(**) Option "Protocol" "Standard"
(**) Option "XkbKeycodes" "xfree86"
(**) XKB: keycodes: "xfree86"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(**) |-->Input Device "Mouse[1]"
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/PEX,/usr/X11R6/lib/X11/fonts/latin2/75dpi,/usr/X11R6/lib/X11/fonts/latin2/100dpi,/usr/X11R6/lib/X11/fonts/kwintv,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni,/usr/X11R6/lib/X11/fonts/CID"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(++) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.3
XFree86 XInput driver : 0.1
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 1019,0957 rev 44 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 23 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 11 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:0c:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 0000,0000 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) NVidia Riva Ultra 64 rev 21, Mem @ 0xd4000000/24, 0xd6000000/25
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
[0] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[1] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[2] -1 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[3] -1 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[4] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[5] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[6] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[1] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[2] -1 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[3] -1 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[4] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[5] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[6] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[6] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[7] -1 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[8] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[9] -1 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[10] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[11] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[12] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.1251
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.1251
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, RIVA TNT2 (Ultra),
RIVA TNT2 (Vanta), RIVA TNT2 (M64), RIVA TNT2 (??), RIVA TNT2 (??),
RIVA TNT2 (Integrated), GeForce 256, GeForce DDR, Quadro,
GeForce2 MX, GeForce2 MX DDR, GeForce2 Go, GeForce2 MXR,
GeForce2 GTS, GeForce2 GTS, GeForce2 Ultra, Quadro2 Pro, GeForce3,
GeForce3, GeForce3, GeForce3
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset RIVA TNT2 (M64) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[6] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[7] -1 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[8] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[9] -1 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[10] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[11] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[12] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[6] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[7] -1 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[12] -1 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[14] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
[16] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[17] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "2"
(**) NVIDIA(0): Use of AGPGART requested
(--) NVIDIA(0): Linear framebuffer at 0xD6000000
(--) NVIDIA(0): MMIO registers at 0xD4000000
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(--) NVIDIA(0): DAC 0: maximum pixel clock at 16 bpp: 300 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) NVIDIA(0): Monitor[0]: Using hsync range of 30.00-70.00 kHz
(II) NVIDIA(0): Monitor[0]: Using vrefresh range of 50.00-93.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 300.00 MHz
(WW) NVIDIA(0): Default mode "1280x960" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1920x1440" deleted (hsync out of range)
(WW) NVIDIA(0): Default mode "1920x1440" deleted (hsync out of range)
(**) NVIDIA(0): Validated modes for head 0:
(**) NVIDIA(0): Mode "1024x768": 93.0 MHz, 66.4 kHz, 82.8 Hz
(**) NVIDIA(0): Mode "640x480": 28.0 MHz, 32.4 kHz, 64.6 Hz
(**) NVIDIA(0): Mode "800x600": 43.7 MHz, 40.7 kHz, 65.1 Hz
(II) NVIDIA(0): Virtual Screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (32, 24) cm
(--) NVIDIA(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B]
[1] 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[8] -1 0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
[9] -1 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[14] -1 0x0000ec00 - 0x0000ec3f (0x40) IX[B]
[15] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[17] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
[18] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[19] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NVIDIA(0): Write-combining range (0xd6000000,0x2000000)
(II) NVIDIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided FillMono8x8PatternRects replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-GLX
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension RENDER
(II) [GLX]: Calling GlxExtensionInit
(II) [GLX]: associated 8 out of 8 GLX visuals
(II) Keyboard "Keyboard[0]" handled by legacy driver
(**) Option "Protocol" "imps/2"
(**) Mouse[1]: Protocol: "imps/2"
(**) Option "CorePointer"
(**) Mouse[1]: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse[1]: Buttons: 3
(**) Option "ZAxisMapping" "4 5"
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
