Hallo, habe hier eine 4 GB CF-Karte und es gelingt mir nicht, die Partitionstabelle zu verändern.
Der Auslieferungszustand stellt sich wie folgt dar:
Disk /dev/sdb: 4034 MB, 4034838528 bytes
128 heads, 63 sectors/track, 977 cylinders
Units = cylinders of 8064 * 512 = 4128768 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 2 978 3936240 c W95 FAT32 (LBA)
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 1) logical=(1, 0, 1)
Partition 1 has different physical/logical endings:
phys=(976, 127, 63) logical=(977, 31, 63)
den habe ich mittels fdisk wie folgt verändert:
Disk /dev/sdb: 4034 MB, 4034838528 bytes
128 heads, 63 sectors/track, 977 cylinders
Units = cylinders of 8064 * 512 = 4128768 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 977 3939232+ 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Allerdings wird das vom Medium komplett ignoriert. Selbst wenn ich nur
den ID auf "83" setze hat das keine Auswirkung, denn wenn ich das Medium
neu einlege, ist alles beim Alten.
Karte kaputt, oder low-cost China-Version mit "gefakter"
Partitionstabelle, oder ...?
Gruß
Stefan.
--
Stefan U. Hegner
<[EMAIL PROTECTED]>
* * *
D-32584 Löhne --- good ole Germany
internet: http://www.hegner-web.de
* * *
GPG-Key | D9DB 51BD 2DA6 9B3A 41CB
F-Print | 0287 05A1 8D11 38BA CE91
signature.asc
Description: OpenPGP digital signature
-- Linux mailing list [email protected] subscribe/unsubscribe: http://lug-owl.de/mailman/listinfo/linux Hinweise zur Nutzung: http://www.lug-owl.de/Mailingliste/hints.epo
