Guten Morgen. Ich habe ein Problem mit dem Brennen von CD und DVD. Versucht habe ich es mit Brasero und Gnomebaker mit verschiedenen CDs und DVDs unter Ubuntu 9.10 32bit. Ich bin in der Gruppe CD eingetragen. Lesen ist kein Problem. Er brennt auch die Daten auf CD. Der Dateimanager zeigt sie an, ich kann sie aber nicht öffnen. Meldung: die Daten seien evtl. beschädigt. Die Grösse der Dateien ist ist egal. In diesem Fall waren es 2 Dateien a 12MB.
Unter Google gibt's ein paar Links ohne einer Lösung des Problems. Es scheint irgendwie was mit "Fixating... WARNING: Some drives don't like fixation in dummy mode" zu tun zu haben Ich habe eine Textdatei mit der Fehlermeldung angehangen. Mein System: Board: Gigabyte MA770T-UD3P Brenner: LG HL-DT-SD GH22N550 SATA Festplatte: WD 5001AALS SATA Prozessor: AMD Phenom X2 550 Speicher: 4GB GSKILL Gruss, Ralf __________________________________________________ Do You Yahoo!? Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz gegen Massenmails. http://mail.yahoo.com
wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 3 = CD-ROM XA mode 2 Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVDRAM GH22NS50 ' Revision : 'TN01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x001A (DVD+RW) Profile: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x0010 (DVD-ROM) Profile: 0x0009 (CD-R) (current) Profile: 0x000A (CD-RW) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 16332 kB/s 92x CD 11x DVD FIFO size : 12582912 = 12288 KB Speed set to 7057 KB/s 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 02 0F 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 2A 30 02 80 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 40s wodim: The current problem looks like a buffer underrun. wodim: It looks like 'driveropts=burnfree' does not work for this drive. wodim: Please report. wodim: Make sure that you are root, enable DMA and check your HW/OS set up. write track data: error after 1079296 bytes Writing time: 10.255s Average write speed 16.4x. Min drive buffer fill was 94% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 17.808s wodim: fifo had 209 puts and 18 gets. wodim: fifo was 0 times empty and 6 times full, min fill was 96%.
-- Linux mailing list [email protected] subscribe/unsubscribe: http://lug-owl.de/mailman/listinfo/linux Hinweise zur Nutzung: http://www.lug-owl.de/Mailingliste/hints.epo
