In article <[EMAIL PROTECTED]>,
Lajber Zoltan <[EMAIL PROTECTED]> writes:
>> Ez az elso RAID kartyam, igy arra lennek meg kivancsi, hogy az
>
> Nem tartom tul jo otletneka hw raid-et.
Miert is?
(Kezdjunk egy hitvitat! ;-)
Vagy csak a Promise-t?
>> Intel, 3WARE, LSI-Logic kartyak eseten sincs a /proc-ban informacio a
>> disk-ekrol, a raid tomb allapotarol?
>
> Az ibm-nek es a 3ware-nek van egy parancsosoros utility-je, ami
> scriptelheto.
Kis izelito:
# tw_cli info
List of controllers
-------------------
Controller 0: 8006-2LP (2)
# tw_cli info c0
Controller: c0
-------------
Driver: 1.26.00.039
Model: 8006-2LP
FW: FE7S 1.05.00.063
BIOS: BE7X 1.08.00.048
Monitor: ME7X 1.01.00.038
Serial #: F14902A4100335
PCB: Rev5
PCHIP: 1.30-66
ACHIP: 3.20
# of units: 1
Unit 0: RAID 1 152.67 GB ( 320171008 blocks): OK
# of ports: 2
Port 0: Maxtor 6Y160M0 Y44PJ3FE 152.67 GB (320173056 blocks): OK(unit 0)
Port 1: Maxtor 6Y160M0 Y44PJ8PE 152.67 GB (320173056 blocks): OK(unit 0)
# tw_cli info c0 u0
Unit /c0/u0
---------------------
Status: OK
Unit Type: RAID 1
Stripe Size: N/A
Size: 152.67 GB (320171008 blocks)
# of subunits: 2
Subunit 0: CBOD: OK
Physical Port: 0
Logical Port: 0
Subunit 1: CBOD: OK
Physical Port: 1
Logical Port: 1
# tw_cli
3ware CLI> help info
This command will show you various pieces of information about controllers
info [c<c> [u<u>|p<p>] [item]]
c - the controller id
u - the unit id
p - the port id
- If u is specified, item can be one of the following:
status, rebuildstatus, verifystatus, initializestatus
- If p is specified, item can be one of the following:
status, model, serial, capacity, smart
- If neither u or p is specified, item can be one of the following
driver, model, firmware, bios, monitor, serial, pcb, pchip, achip,
numports, numunits, numdrives, unitstatus, drivestatus
3ware CLI> help
Copyright (c) 2003 3ware, Inc. All rights reserved.
3ware CLI (version 2.00.00.032b)
Commands Description
-------------------------------------------------------------------
info Displays information about the controller
alarms Displays or deletes the list of AENs
set Displays or modifies controller settings
maint Performs maintenance operations on a controller
quit Exits the CLI
Type help <command> to get more details about a particular command.
3ware CLI>
Es me'g a smartd is latja a diszkeket!
kissg
_________________________________________________
linux lista - [email protected]
http://mlf2.linux.rulez.org/mailman/listinfo/linux
