On Thu, Jan 12, 2006 at 03:03:18PM +0100, SZOKOVACS Robert wrote:
> On Thursday 12 January 2006 15:57, Makó Gábor wrote:
> >
> > Szerintem az "raid-extra-boot"-bol tudja, hogy hol van kernel (sda,sdb).
>
> valoban. Tehat tud raidrol bootolni. egyeb?
Nem abbol tudja. zless /usr/share/doc/lilo/README.raid1.gz
Only RAID1 is supported. LILO may be used to boot a system
containing other RAID level partitions, but it may not be
installed on any RAID partition other than RAID level 1.
For the simplest of "skewed" installations, it may be undesirable
to have LILO automatically write boot records outside of the RAID
partition. In this case, 'raid-extra-boot=' should be specified,
literally, as "none"; viz.,
boot = /dev/md1
raid-extra-boot = none
With this specification, LILO will write the boot record to
'/dev/md0' only. If the RAID disk on the lowest BIOS device code
fails, the array may not be bootable, except from a floppy disk.
Tehat amig mukodik a tomb, addig be tud bootolni "csak" arrol is.
A gond akkor van, ha a tomb egyik tagja megserul, kiesik. A
raid-extra-boot opcio ahhoz kell, hogy kifejezetten a megadott
diszkek mbr-jebe is beleirodjon a lilo bootloader elsodleges
resze.
--
Udvozlettel
Zsiga
_________________________________________________
linux lista - [email protected]
http://mlf2.linux.rulez.org/mailman/listinfo/linux
