On 06-Apr-19 15:09, Nagy Gabor wrote: > On 06-Apr-19 10:48, Andras HORVATH wrote: > > > Nem erdekel a marakodasuk, sem a politika. Az erdekel, hogyan tudnek Linux > > > es 2.6-os kernel alatt irni CD-t, DVD-t. > > > > barmelyik aktualis disztribucioval? > > Csak Debian testinggel neztem.
Jelentem, Kubuntu akarmivel (most kb. fel eve aktualis valtozattal) ugyanez a jelenseg. > > ps. pontos hibauzenet es verziolista is segitene a hibakeresesben. Itt jon alabb a kimenetbol altalam fontosnak gondolt resz. Megjegyzes, nem csak k3b-vel, hanem root-kent, direktben cdrecord-ot futtatva ugyanezt (vagy ilyesmit) kapok. k3b logja: System ----------------------- K3b Version: 0.12.12 KDE Version: 3.5.2 QT Version: 3.3.6 Kernel: 2.6.12.1 Devices ----------------------- HL-DT-ST DVDRAM GSA-5163D A102 (/dev/scd0, /dev/sg0) at [CD-R; CD-RW;... Compaq DVD-ROM SD-C2612 1A23 (/dev/hdc, ) at /cdrom [CD-ROM; DVD-ROM]... K3b ----------------------- Size of filesystem calculated: 434 Used versions ----------------------- cdrecord: 2.1.1a03 /usr/bin/cdrecord: Warning: Running on Linux-2.6.12.1 /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 SCSI buffer size: 64512 Using libscg version 'debian-0.8debian2'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-5163D' Revision : 'A102' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0011 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 (current) Profile: 0x000A Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Input/output error. read buffer: scsi sendcmd: cmd timeout after 6.009 (40) s CDB: 3C 00 00 00 00 00 00 FC 00 00 resid: 2 cmd finished after 6.009s timeout 40s Track 01: data 0 MB Total size: 0 MB (00:05.81) = 436 sectors Lout start: 1 MB (00:07/61) = 436 sectors Current Secsize: 2048 Starting to write CD/DVD at speed 40 in real TAO mode for multi session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Performing OPC... Starting new track at sector: 0 Track 01: 0 of 0 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 9B 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.004s timeout 40s /usr/bin/cdrecord: The current problem looks like a buffer underrun. /usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. /usr/bin/cdrecord: Please report. /usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. write track data: error after 317440 bytes Writing time: 13.577s Average write speed 0.4x. Fixating... Fixating time: 16.959s /usr/bin/cdrecord: fifo had 14 puts and 6 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord.mmap -v gracetime=2 dev=0,0,0 speed=40 -tao driveropts=burnfree -eject -multi -xa -tsize=434s - _________________________________________________ linux lista - [email protected] http://mlf2.linux.rulez.org/mailman/listinfo/linux
