Hello!
Egy IBM 336 szerver raid beallitasait szertnek elerni.
dmesg -ből:
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
ipr: IBM Power RAID SCSI Device Driver version: 2.1.2 (February 8, 2006)
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 28 (level, low) -> IRQ 17
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030, FwRev=01032821h, Ports=1, MaxQ=222, IRQ=17
Vendor: LSILOGIC Model: 1030 IM IM Rev: 1000
Type: Direct-Access ANSI SCSI revision: 02
CSI device sda: 143110144 512-byte hdwr sectors (73272 MB)
sda: Write Protect is off
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 143110144 512-byte hdwr sectors (73272 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now optimal, enabled, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
mptbase: ioc0: PhysDisk is now online, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
mptbase: ioc0: PhysDisk is now online, quiesced
Vendor: IBM Model: 25P3495a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
Fusion MPT FC Host driver 3.03.07
Fusion MPT SAS Host driver 3.03.07
Fusion MPT misc device (ioctl) driver 3.03.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
-------------------
lspci:
0000:04:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 08)
-------------------
A letrehozott raid tombre siman felment a debian sarge.
2.6.16.20 kernelt foritottam hozza
Az IBM CD levo RaidMan -t ill. a tobbi ott levo programot probaltam hasznalni
hozza.
Nem jott ossze.
A RaidAgnt.sh elindul, lehet hozza kapcsolodni a RaidMan.sh -al ill. a win-es
programmal is, de az agent nem talalja a hardwar-t.
(Az IBM cd-t bootolva ugyan a program megtalalja :O ).
1. Mi lehet a megoldás?
2. tapasztalat ezzel a vezerlovel? erdemes hasznalni vagy linux alatt inkabb itt
is a sw-raid a javasolt?
--
Udvozlettel:
Gerendas Zoltan
_________________________________________________
linux lista - [email protected]
http://mlf2.linux.rulez.org/mailman/listinfo/linux
