Kedves Listatagok!
 
2 napja szívok ezzel a fritz kártyával. 
 
A kerel fordítás után a drivert betölti, látszólag minden rendben: (dmesg-ből).
 
CAPI-driver Rev 1.1.4.1: loaded
kcapi: capidrv attached
kcapi: appl 1 up
capidrv: Rev 1.1.4.1: loaded
fcpci: AVM FRITZ!Card PCI driver, revision 0.5.2
fcpci: (fcpci built on Aug 19 2006 at 18:52:49)
fcpci: Loading...
fcpci: Driver 'fcpci' attached to stack
kcapi: driver fcpci attached
fcpci: Auto-attaching...
fcpci: Stack version 3.11-02
kcapi: Controller 1: fritz-pci attached
kcapi: card 1 "fritz-pci" ready.
kcapi: notify up contr 1
capidrv: controller 1 up
fcpci: Loaded.
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled

 
azonban:
 
depmod: *** Unresolved symbols in /lib/modules/2.4.21/misc/fcpci.o
depmod:         enable_irq
depmod:         __kfree_skb
depmod:         alloc_skb
depmod:         vsnprintf
depmod:         __release_region
depmod:         attach_capi_driver
depmod:         snprintf
depmod:         kmalloc
depmod:         _ctype
depmod:         pci_enable_device
depmod:         __tasklet_schedule
depmod:         __check_region
depmod:         vfree
depmod:         detach_capi_driver
depmod:         cpu_raise_softirq
depmod:         pcibios_present
depmod:         free_irq
depmod:         tasklet_kill
depmod:         __out_of_line_bug
depmod:         kfree
depmod:         disable_irq
depmod:         request_irq
depmod:         skb_over_panic
depmod:         pci_find_device
depmod:         jiffies
depmod:         __vmalloc
depmod:         tasklet_init
depmod:         softnet_data
depmod:         __request_region
depmod:         printk
depmod:         irq_stat
depmod:         ioport_resource
fax:~#

 
ez gyanús, bár elvileg minden OK. Ha felhívom a számát mobilról, ki is jelzi, 
hogy bejött a hívás, 
de "call rejected".
 
etc/init.d/capiutils restart ezt adja:
 
fax:/var/log/hylafax# /etc/init.d/capiutils restart
 * Restarting ISDN CAPI Cards :
Warning: loading /lib/modules/2.4.21/misc/fcpci.o will taint the kernel: 
non-GPL license - 
Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted 
modules
Module fcpci loaded, with warnings
 
(a warning itt csak azt jelenti, hogy nem nyílt forrás a driver).
 
ha el akarom indítani a capi4hylafax-ot, a log-jába már ez érkezik:
 
Aug 19 20:26:29.47: [  891]: c2faxrecv - ERROR: CAPI not installed, started or 
have no access 
rights on it!
Aug 19 20:26:29.49: [  891]: c2faxrecv - ERROR: CAPI not installed, started or 
have no access 
rights on it!
Aug 19 20:26:29.49: [  891]: c2faxrecv - WARNING:
Device "faxCAPI" can't start any threads needed for receiving faxes!
Aug 19 20:26:29.49: [  891]: c2faxrecv - INFO:
No device is waiting for faxes so the program can terminate now.

 
Egyéb:
 
kernel verzió - 2.4.21 (egy másik gépen ezzel a kernellel fut is, de azt nem én 
installáltam fel)
Fritz driver verzió: fcpci-suse93-3.11-07.tar.gz (a readme-je szerint 2.4.20-as 
kerneltől felfelé jó 
mindenhez a wrapperrel).
 
A konfig, amin futtatom:
 
Compaq Proliant 5000, 4xppro200MHz, 512 MB RAM, Compaq SMART/2 PCI SCSI RAID 
vezérlő, 
stb...
 
a kernelem configja (ISDN rész)
 
#
# ISDN subsystem
#
CONFIG_ISDN=y
CONFIG_ISDN_BOOL=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
 
#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
# CONFIG_ISDN_DIVERSION is not set
 
#
# Passive ISDN cards
#
# CONFIG_ISDN_DRV_HISAX is not set
 
#
# Active ISDN cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_ISDN_DRV_EICON=y
CONFIG_ISDN_DRV_EICON_DIVAS=m
CONFIG_ISDN_DRV_EICON_OLD=m
CONFIG_ISDN_DRV_EICON_PCI=y
CONFIG_ISDN_DRV_EICON_ISA=y
# CONFIG_ISDN_DRV_TPAM is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
# CONFIG_HYSDN is not set
# CONFIG_HYSDN_CAPI is not set

 
Ha valaki járt már így, akkor írja meg, köszi, Péter
 
 

_________________________________________________
linux lista      -      [email protected]
http://mlf2.linux.rulez.org/mailman/listinfo/linux

válasz