Sziasztok!
roviden a sztori:
van egy gep, amin ma tortent woody->sarge upgrade (nem rohogni!! :) )...
2.4.32-es kernel volt rajta, mar a sarge-n forditottam egy 2.4.33.3-at +
grsec-et...
minden ok volt, lilo, reboot, felallt a gep, melo tovabb...
az elet ugy hozta, hogy kellett meg 1 dolog a kernelbe, ujreforditom,
lilo, aztan ezt kapom:
------- CUT ---------
[EMAIL PROTECTED]:~# lilo -v -v -v
LILO version 22.6.1, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2004 John Coffman
Released 17-Nov-2004, and compiled at 12:32:32 on May 25 2005
Debian GNU/Linux
pf_hard_disk_scan: ndevs=3
0340 4561D3D4 /dev/hdb
0800 76C33F6D /dev/sda
0810 17C33F28 /dev/sdb
Resolve invalid VolumeIDs
Resolve duplicate VolumeIDs
0340 4561D3D4 /dev/hdb
0800 76C33F6D /dev/sda
0810 17C33F28 /dev/sdb
device codes (user assigned pf) = 0
device codes (user assigned) = 0
device codes (BIOS assigned) = 7
device codes (canonical) = 7
RAID info: nr=2, raid=2, active=2, working=2, failed=0, spare=0
md: RAIDset device 0 = 0x0802
Device 0x0802: BIOS drive 0x80, 255 heads, 30515 cylinders,
63 sectors. Partition offset: 1959930 sectors.
Using Volume ID 76C33F6D on bios 80
RAID scan: geo_get: returns geo->device = 0x80 for device 0802
disk->start = 1959930 raid_offset = 0 (00000000)
Name: /dev/sda2 yields MBR: /dev/sda (without primary partition check)
md: RAIDset device 1 = 0x0812
Device 0x0812: BIOS drive 0x81, 255 heads, 30515 cylinders,
63 sectors. Partition offset: 1959930 sectors.
Using Volume ID 17C33F28 on bios 81
RAID scan: geo_get: returns geo->device = 0x81 for device 0812
disk->start = 1959930 raid_offset = 0 (00000000)
Name: /dev/sdb2 yields MBR: /dev/sdb (without primary partition check)
RAID list: /dev/sda is device 0x0800
Fatal: Unable to open dev/sdb
------- CUT ---------
a poen, hogy fdisk latja jol az sdb-t, sot, mindharom sw raid1 device is
eletkepesnek latszik...
dmesg aszongya, hogy boot-kor latszik minden, raid device-ok rendben...
kerdes: miert Unable to open dev/sdb ??
esetleg a grsec kavar be (RBAC nem fut, ha kell, adok .config-ot rola...) ?
nem merem ujrainditani, majd hetfon bebaktatok a szerverhez, de addig
puhatoloznek egy kicsit...
------- CUT ---------
[EMAIL PROTECTED]:~# cat /etc/lilo.conf
lba32
boot=/dev/md0
root=/dev/md0
raid-extra-boot=/dev/sda,dev/sdb
install=/boot/boot-menu.b
map=/boot/map
delay=20
vga=5
default=Lin
image=/boot/vmlinuz
label=Lin
read-only
image=/boot/vmlinuz.old
label=Linold
read-only
------- CUT ---------
elore is koszi minden otletet
Misi
_________________________________________________
linux lista - [email protected]
http://mlf2.linux.rulez.org/mailman/listinfo/linux
