Le mercredi 16 janvier 2008 à 17:13 +0100, Jonathan ROTH a écrit : > François DREYFÜRST a écrit : > > Et là, problème tout con mais inattendu : la fenêtre supplémentaire qui > > s'ouvre alors est un peu trop grande et apparemment non scalable, ce qui > > fait que ses boutons « Appliquer » ou autre ne sont pas accessibles ... > > pas moyen de faire des réglages fins par là. > > > > Alt + Clic gauche sur n'importe quel endroit d'une fenêtre permet de la > déplacer. > OK, je teste. > > Au passage, voici le message d'erreur de TVtime : > > > > tvtime > > Utilise tvtime 1.0.2. > > Lit la configuration depuis /etc/tvtime/tvtime.xml > > Lit la configuration depuis /home/francois/.tvtime/tvtime.xml > > xvoutput: No XVIDEO port found which supports YUY2 images. > > > > *** tvtime requires hardware YUY2 overlay support from your video card > > *** driver. If you are using an older NVIDIA card (TNT2), then > > *** this capability is only available with their binary drivers. > > *** For some ATI cards, this feature may be found in the experimental > > *** GATOS drivers: http://gatos.souceforge.net/ > > *** If unsure, please check with your distribution to see if your > > *** X driver supports hardware overlay surfaces. > > > > Cette erreur là est plutôt bizarre... > > Tvtime n'a pas une option pour choisir le pilote de sortie ? > > Ta carte supporte bien l'overlay (xvinfo pour vérifier) ?
$ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present Je précise qu'actuellement je suis avec le pilote fglrx. Au fait, dmesg donne entre autres ceci : em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (eb1a:2881): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx: you're using the experimental/unstable tree from mcentral.de em28xx: there's also a stable tree available but which is limited to em28xx: linux <=2.6.19.2 em28xx: it's fine to use this driver but keep in mind that it will move em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's em28xx: proved to be stable em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:11.6 to 64 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input3 input: em2880/em2870 remote control as /class/input/input4 em28xx-input.c: remote control handler attached attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 8c 6a 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 0a 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= eb1a:2881 AC97 audio (5 sample rates) USB Remote wakeup capable 500mA max power Table at 0x04, strings=0x206a, 0x006a, 0x0000 tuner 1-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 /home/francois/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback tuner 0x61: Configuration acknowledged /home/francois/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback /home/francois/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! /home/francois/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded attach_inform: tvp5150 detected. tvp5150 1-005c: tvp5150am1 detected. > ===== > Comment dire, la carte est configurée en mode analogique ou numérique à > l'ouverture du dev, par un ioctl ou un truc du genre. Enfin j'ai du mal > à exprimer ma pensée... > > > cat /dev/video0 me donne un flux, évidemment incompréhensible, de > > caractères ; je suppose que c'est ce qui est attendu. > > > > Tout à fait, la carte fonctionne donc, je penses qu'il n'est pas > nécéssaire de chercher plus loin de ce coté. OK > > > PS: Il me semble que tu ai parlé d'une donnée sur le signal reçu qui > n'était pas nul, chez moi la valeur du signal n'est pas bonne: si je ne > capte rien, le rapport signal/bruit est à 67%, et quand je capte, > celui-ci varie entre 50 et 80% (ce qui correspondrait à peu près à > 60-95% par analogie avec mon autre récepteur). C'était lors d'un scan TNT avec Kaffeine ; j'avais au mieux env. 30 % ; la couleur de la barre était passée pour un instant de rouge (semble pas bon) à orange je crois (un poil mieux).
