Jo he intentat conectarme amb aquest miser modem desde que mel van
donar, fara 1 any.
Ha sigut impossible, he probat tot, tot i tot, tots els metodes, totes
le distribucions basades en debian i res. jo de tu demanaria un router
XD


On Fri, 28 Jan 2005 21:27:24 +0100, agecanonix
<[EMAIL PROTECTED]> wrote:
> Hola, ho estic intentant per� encara no puc conectar el modem speedtouch
> de telefonica a internet amb l'ubuntu. Segueixo el manual que hi ha a la
> p�gina http://linux-usb.sourceforge.net/SpeedTouch/ubuntu/warty.html
> per� no hi ha manera.
> 
> Els parametres que em dona telefonica s�n els seg�ents:
> 
> PPP id: [EMAIL PROTECTED]
> PPP pwd: *****
> Encapsulado: PPPoE (RFC 2516)
> ITV: 8
> ICV: 32
> 
> Des del meu syslog puc veure els seg�ents missatges:
> 
> Jan 28 21:28:16 localhost kernel: usb 2-1: new full speed USB device
> using address 2
> Jan 28 21:28:16 localhost kernel: usb 2-2: new full speed USB device
> using address 3
> Jan 28 21:28:16 localhost kernel: usbcore: registered new driver speedtch
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:00:1d.7[D] ->
> GSI 23 (level, low) -> IRQ 193
> Jan 28 21:28:16 localhost kernel: ehci_hcd 0000:00:1d.7: Intel Corp.
> 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
> Jan 28 21:28:16 localhost kernel: PCI: Setting latency timer of device
> 0000:00:1d.7 to 64
> Jan 28 21:28:16 localhost kernel: ehci_hcd 0000:00:1d.7: irq 193, pci
> mem e0a37800
> Jan 28 21:28:16 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus
> registered, assigned bus number 5
> Jan 28 21:28:16 localhost kernel: PCI: cache line size of 128 is not
> supported by device 0000:00:1d.7
> Jan 28 21:28:16 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0
> enabled, EHCI 1.00, driver 2004-May-10
> Jan 28 21:28:16 localhost kernel: hub 5-0:1.0: USB hub found
> Jan 28 21:28:16 localhost kernel: hub 5-0:1.0: 8 ports detected
> Jan 28 21:28:16 localhost kernel: usb 2-1: USB disconnect, address 2
> Jan 28 21:28:16 localhost kernel: usb 2-2: USB disconnect, address 3
> Jan 28 21:28:16 localhost kernel: hw_random hardware driver 1.0.0 loaded
> Jan 28 21:28:16 localhost kernel: usb 2-1: new full speed USB device
> using address 4
> Jan 28 21:28:16 localhost kernel: usb 2-2: new full speed USB device
> using address 5
> Jan 28 21:28:16 localhost kernel: ICH5: IDE controller at PCI slot
> 0000:00:1f.1
> Jan 28 21:28:16 localhost kernel: PCI: Enabling device 0000:00:1f.1
> (0005 -> 0007)
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:00:1f.1[A] ->
> GSI 18 (level, low) -> IRQ 185
> Jan 28 21:28:16 localhost kernel: ICH5: chipset revision 2
> Jan 28 21:28:16 localhost kernel: ICH5: not 100%% native mode: will
> probe irqs later
> Jan 28 21:28:16 localhost kernel: ICH5: port 0x01f0 already claimed by ide0
> Jan 28 21:28:16 localhost kernel:     ide1: BM-DMA at 0xfc08-0xfc0f,
> BIOS settings: hdc:pio, hdd:pio
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:00:1f.5[B] ->
> GSI 17 (level, low) -> IRQ 201
> Jan 28 21:28:16 localhost kernel: PCI: Setting latency timer of device
> 0000:00:1f.5 to 64
> Jan 28 21:28:16 localhost kernel: AC'97 0 analog subsections not ready
> Jan 28 21:28:16 localhost kernel: intel8x0_measure_ac97_clock: measured
> 49594 usecs
> Jan 28 21:28:16 localhost kernel: intel8x0: clocking to 48000
> Jan 28 21:28:16 localhost kernel: ohci1394: $Rev: 1223 $ Ben Collins
> <[EMAIL PROTECTED]>
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:02:03.0[A] ->
> GSI 20 (level, low) -> IRQ 209
> Jan 28 21:28:16 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0
> (PCI): IRQ=[209]  MMIO=[feaff800-feafffff]  Max Packet=[2048]
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:02:05.0[A] ->
> GSI 22 (level, low) -> IRQ 217
> Jan 28 21:28:16 localhost kernel: sk98lin: Network Device Driver v7.08
> Jan 28 21:28:16 localhost kernel: (C)Copyright 1999-2004 Marvell(R).
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:02:05.0[A] ->
> GSI 22 (level, low) -> IRQ 217
> Jan 28 21:28:16 localhost kernel: eth0: 3Com Gigabit LOM (3C940)
> Jan 28 21:28:16 localhost kernel:       PrefPort:A  RlmtMode:Check Link
> State
> Jan 28 21:28:16 localhost kernel: ACPI: PCI interrupt 0000:02:09.0[A] ->
> GSI 21 (level, low) -> IRQ 225
> Jan 28 21:28:16 localhost kernel: 3c59x: Donald Becker and others.
> www.scyld.com/network/vortex.html
> Jan 28 21:28:16 localhost kernel: 0000:02:09.0: 3Com PCI 3c900 Cyclone
> 10Mbps TPO at 0xd800. Vers LK1.1.19
> Jan 28 21:28:16 localhost kernel: ieee1394: Host added:
> ID:BUS[0-00:1023]  GUID[00e01800005423af]
> Jan 28 21:28:16 localhost kernel: ACPI: Power Button (FF) [PWRF]
> Jan 28 21:28:16 localhost udev[3812]: creating device node '/dev/vcs1'
> Jan 28 21:28:16 localhost udev[3866]: removing device node '/dev/vcs1'
> Jan 28 21:28:16 localhost udev[3818]: creating device node '/dev/vcsa1'
> Jan 28 21:28:16 localhost udev[3872]: removing device node '/dev/vcsa1'
> Jan 28 21:28:17 localhost udev[3869]: creating device node '/dev/vcs1'
> Jan 28 21:28:17 localhost udev[3875]: creating device node '/dev/vcsa1'
> Jan 28 21:28:19 localhost postfix/postfix-script: starting the Postfix
> mail system
> Jan 28 21:28:19 localhost kernel: NET: Registered protocol family 10
> Jan 28 21:28:19 localhost kernel: Disabled Privacy Extensions on device
> c02cc0c0(lo)
> Jan 28 21:28:19 localhost kernel: IPv6 over IPv4 tunneling driver
> Jan 28 21:28:19 localhost postfix/master[4141]: daemon started --
> version 2.1.3
> Jan 28 21:28:19 localhost /usr/sbin/cron[4252]: (CRON) INFO (pidfile fd = 3)
> Jan 28 21:28:19 localhost /usr/sbin/cron[4253]: (CRON) STARTUP (fork ok)
> Jan 28 21:28:19 localhost /usr/sbin/cron[4253]: (CRON) INFO (Running
> @reboot jobs)
> Jan 28 21:28:19 localhost modem_run[4263]: modem_run version 1.2 started
> by root uid 0
> Jan 28 21:28:19 localhost kernel: usb 2-1: usbfs: interface 1 claimed
> while 'modem_run' sets config #1
> Jan 28 21:28:19 localhost kernel: usb 2-1: usbfs: interface 2 claimed
> while 'modem_run' sets config #1
> Jan 28 21:28:21 localhost kernel: usb 2-1: bulk timeout on ep5in
> Jan 28 21:28:21 localhost kernel: usb 2-1: usbfs: USBDEVFS_BULK failed
> ep 0x85 len 512 ret -110
> Jan 28 21:28:25 localhost kernel: usb 2-1: usbfs: interface 0 claimed
> while 'modem_run' sets config #1
> Jan 28 21:28:25 localhost kernel: usb 2-1: usbfs: interface 1 claimed
> while 'modem_run' sets config #1
> Jan 28 21:28:25 localhost kernel: usb 2-1: usbfs: interface 2 claimed
> while 'modem_run' sets config #1
> Jan 28 21:28:55 localhost modem_run[4263]: ADSL synchronization has been
> obtained
> Jan 28 21:28:55 localhost modem_run[4263]: ADSL line is up (512 kbit/s
> down | 128 kbit/s up)
> Jan 28 21:29:05 localhost br2684ctl[4266]: Interface "nas0" created
> sucessfully
> Jan 28 21:29:05 localhost br2684ctl[4266]: Communicating over ATM
> 0.8.32, encapsulation: LLC
> Jan 28 21:29:05 localhost br2684ctl[4266]: Interface configured
> Jan 28 21:29:05 localhost br2684ctl[4270]: RFC 1483/2684 bridge daemon
> started
> Jan 28 21:29:25 localhost pppd[4307]: In file /etc/ppp/peers/speedtch:
> unrecognized option 'Icp-echo-interval'
> 
> En el kern.log tamb� hi apareix:
> 
> usbconec:registred new driver speedtch
> speedtouch: unknown symbol crc32_be
> 
> I  a vegades, al arrancar, no sempre apareix el missatge:
> modprobe: FATAL error:
> lib/modules/2.6.8.1-3-386/kernel/drivers/usb/misc/speedtouch.ko unknow...
> 
> Alguna ajuda?
> 
> Salut.
> 
> Francesc.
> 
> ----------------------------------------------------------------
> Podeu consultar els arxius d'aquesta llista o canviar la vostra
> subscripci� a http://www.softcatala.org/llistes/
> ----------------------------------------------------------------
> 


-- 
-------------------------------------------------------------------------------------------------------
"How should I know if it works?  That's what beta testers are for.  I only
coded it."
(Attributed to Linus Torvalds, somewhere in a posting)
----------------------------------------------------------------
Podeu consultar els arxius d'aquesta llista o canviar la vostra
subscripci� a http://www.softcatala.org/llistes/
----------------------------------------------------------------

Respondre per correu electrònic a