--- In LINUX_Newbies@yahoogroups.com, "highskywhy@..." <highskywhy@...> wrote:
>
> 
> Sa Mär 09 13:19:41 2013
> Good afternoon
> Thank You for help.
> 
> 
> 
>> I have done this sort of thing recently.
> *
> I saw
> it is not installed
> but I could see it in the software-center.
> So I am sure
> it is easy to install for me.
> 
>>   gparted should already be
>> installed with xubuntu. If not, from the terminal (also known as the
>> command line) type:
>> 
>> sudo apt-get install gparted
> *
> Thank You.
> 
> 
>> Once that is installed, do the following:
>> 1. Backup your Xubuntu partition just to be on the safe side
> *
> OK
> 
>> 2. Run gparted from the menu. I do not know the specific location
>> on xubuntu but it should be under something like "Administration"
>> or "System" or "System Tools."
> 
> *
> OK
> 
>> 3. Using gparted, delete ONLY the Ubuntu partition.
>> *
>> OK
> 
> 4. Apply changes
> *
> What does this mean?

Gparted has a nice feature where when you do something like 
delete a partition, it does not do this immediately.  Instead
it waits until you apply your changes.  Now on Mint, the
apply occurs as a button on the button bar at the top.  In
Mint that is a check mark.

> 
> 5. Using gparted, resize the Xubuntu partition. If it won't let you
> do this, come back and let me know. We can still get there from
> here.
> *
> OK
> 
> 6. Apply changes
> *
> How can I do this?

See above.

> 
> 7. From the command line type:
> 
> sudo update-grub
> *
> I understand.
> 
> This will update the grub menu so only Xubuntu exists
> 8. From the command line type:
> 
> sudo grub-install
> *
> This I dont understand.

update-grub just gathers the current information.  Since
Ubuntu will be gone, it will build a grub menu with only 
Xubuntu on it.  However, it does not install it on the
disk until you tell it to.  This is done through grub-install.
I missed one thing.  It should be:

sudo grub-install /dev/sda

This is assuming your boot drive is a SATA drive and it
is the first drive in the system.  If your boot drive is
PATA (IDE) then it would be

sudo grub-install /dev/hda

You can figure this out using the following method when
in Xubuntu.  From the command line type:

df -h

This will give you a list of all partitions currently mounted.
There should be one mounted to /.  This is the partition on
which Xubuntu is loaded.  Remove the final number and you 
get the proper disk on which to install grub.  For example
here is mine:

$ df -h
Filesystem                    Size  Used Avail Use% Mounted on
/dev/sda3                      39G  5.8G   31G  16% /
udev                          3.9G  4.0K  3.9G   1% /dev
tmpfs                         1.6G  1.1M  1.6G   1% /run
none                          5.0M     0  5.0M   0% /run/lock
none                          3.9G  1.1M  3.9G   1% /run/shm
none                          100M   12K  100M   1% /run/user
/dev/sda4                      39G  7.9G   29G  22% /alt_boot
/dev/sda5                     834G  517G  275G  66% /data
//10.100.1.202/OracleRetail$   40G   16G   24G  40% /data/alsshare

Notice that / is /dev/sda3.  Removing the number, the proper disk
on which to install grub is /dev/sda.

> 
> This will make the change in grub permanent.
> *
> 
> Why there is:
> sudo update-grub
> AND
> sudo grub-install
> 

Explained above

> 
>> You should at this point have the entire 80 GB available to Xubuntu.
> *
> Thank You.
> 
>> One more note. I always keep all of my data on a separate partition.
> *
> On my Linux Systems
> I have a Desktop.
> In this Desktop there is a directory
> userfiles.
> This directory contains:
> dailyfiles   (new created or downloaded)
> usefiles     (files from other computers)
> backupothers (backup files from other computers and the backup from this 
> computer is on another computer)
> downloads    (programs like Opera I did download from internet)
> So every evening I am copying the directory   dailyfiles on USB Stick 
> and once a week I burn it on CD.
> 
> Is this a good way to save files?
> 

It will work, however, the way I have it set up is that data is
a separte partition.  That means when I install a new OS on the
system, I just have to add that partition to the new OS as
/data WITHOUT FORMATTING and all of my data files are there
without having to restore from backup to see my documents.

> 
> 
>> I always mount it as /data when I install a new or updated Linux OS.
> *
> I copy all files from directory dailyfiles to usb-stick and another 
> computer.
> Only problem are the directories from mail-programmes.
> Claws is very easy to save files there is a subdirectory in the 
> directory dailyfiles.
> 

That is certainly commendable and you should do that.  

> 
>> I don't use /home because some settings for one distro will not work
>> with another distro. In this way, I keep my home partition just for
>> settings then save all of my information on my /data partition. I
>> would suggest this to you while you are doing this. If you want me
>> to modify this to make a scheme such as this work for you, just let
>> me know.
> 
> Thank You.
> If I really would destroy my os
> before I do dangerous things
> I am copying dailyfiles
> and so I loose only program-files and these files I can download again 
> from www.
> 
> 
> Regards
> Sophie
> 
> Again Thank You.
>


Hope this helps!

Regards
Loyal




------------------------------------

To unsubscribe from this list, please email 
linux_newbies-unsubscr...@yahoogroups.com & you will be removed.Yahoo! Groups 
Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/LINUX_Newbies/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/LINUX_Newbies/join
    (Yahoo! ID required)

<*> To change settings via email:
    linux_newbies-dig...@yahoogroups.com 
    linux_newbies-fullfeatu...@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    linux_newbies-unsubscr...@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to