Greetings, A good workaround for the setpci bug is to use -d to select by device ID I believe the device is 8086:2480
G'day, sjames On Thu, 5 Sep 2002, Ronald G Minnich wrote: > > OK, if I do the equivalent of: > setpci -s 0:1f.0 4e.b=1 > > Then writes are enabled. Note you can't really do this due to a bug in the > pcitools == have to do it by program. > > Then, if I run flash_rom, jedec_probe will get an ID of the 82802AB of > > vendor 89, device code AD (4 mbit part) > > So flash_rom I think might be able to flash this part! > > I have added an entry into flash_rom and will test this tomorrow. > > ron > > > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > -- -------------------------steven james, director of research, linux labs ... ........ ..... .... 230 peachtree st nw ste 701 the original linux labs atlanta.ga.us 30303 -since 1995 http://www.linuxlabs.com office 404.577.7747 fax 404.577.7743 ----------------------------------------------------------------------- _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
