On 28 Oct 2002, Eric W. Biederman wrote: > > > make ide_disk.elf > > > Or in the normal case of wanting the nic driver as well. > > > make eepro100--ide_disk.nrv2belf (nrv2b is the upx compression algorithm) > > > > no target like that exists in the latest cvs for the 5.1 tree. > > Try it. It is there.
[rminnich@brain src]$ pwd /home/rminnich/src/etherboot/etherboot-5.1/src [rminnich@brain src]$ make ide_disk.elf make: *** No rule to make target `ide_disk.elf'. Stop. [rminnich@brain src]$ make eepro100--ide_disk.nrv2belf make: *** No rule to make target `eepro100--ide_disk.nrv2belf'. Stop. [rminnich@brain src]$ ?? > > Also, it seems to me that if I set up BOOT_xyz to be BOOT_DISK, that stuff > > should get turned on, so that the Principle of Least Surprise is honored. > > It is honoured you don't have the IDE driver compiled in. I'll look at how to do this, but IMHO if you set BOOT_DISK it should force the IDE driver to get compiled in. Is there a reason not to do this (i.e you're going to support all kinds of non-IDE disks). ron _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
