> Again, I run make and get "make: *** No rule to make target > '.../freebios/mainboard.c', needed by 'mainboard.o'. Stop. that's weird. But there have been several changes lately so we'll have to do some looking around. Andrew, are you seeing this?I don't see this problem.
-Andrew
-------------------------
I found that in my Makefile, which was generated without error by /NLBConfig.py, the path for two files is just /../freebios/mainboard.c and /../freebios/irq_tables.c
Aren't they supposed to be at /../freebios/src/mainboard/via/epia/mainboard.c and /../freebios/src/mainboard/via/epia/irq_tables.c?
Is my config file the cause? Here it is (it's just the latest that was checked in by Ron, just yesterday):
--------------------------------
arch i386
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
ldscript cpu/i386/entry16.lds
ldscript cpu/i386/entry32.lds
mainboardinit cpu/i386/reset16.inc
ldscript cpu/i386/reset16.lds
mainboardinit superio/via/vt8231/setup_serial.inc
mainboardinit pc80/serial.inc
mainboardinit arch/i386/lib/console.inc
mainboardinit northbridge/via/vt8601/raminit.inc
# mainboardinit ram/dump_northbridge.inc
# mainboardinit ram/ramtest.inc
# mainboardinit mainboard/via/epia/do_ramtest.inc
# option RAM_TEST=1
northbridge via/vt8601
southbridge via/vt8231
superio via/vt8231
mainboardinit cpu/p6/earlymtrr.inc
option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
option FINAL_MAINBOARD_FIXUP=1
option HAVE_PIRQ_TABLE=1
option SUPERIO_DEVFN=0x88
object mainboard.o
object irq_tables.o
keyboard pc80
cpu p5
cpu p6
option MAINBOARD_PART_NUMBER=EPIA
option MAINBOARD_VENDOR=VIA
--------------
Andy
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
