On Tue, 2002-11-12 at 19:37, Adam Sulmicki wrote: > > does anyone here runs P6STMT mbo by EliteGroup? > > Here are some sample urls to the MBO: > > http://www.ecs.com.tw/products/p6stmt.htm > > http://www.amptron.com/html/P6STMT.html > > http://www.icuepc.com/p6stmt.htm > > The "WinFast 6300" config file seems to work with it, > > but I was wondering if perhaps there's some better > > config file. > > Ok, I have setup its own configuration for it, with its own PIRQ table. > > Now there's one more issue remaining. At the present time I have to boot > from the PC BIOS classic, and then *warm* boot into the LinuxBIOS. If I do > not do that the system will hard hang in few minutes after boot. It will > be either during fsck (if there's one), or somewhere at Linux command > prompt. > > any ideas? > > How I would go about settting dll.inc ? What's the way to get those > values? >
It is used to configure the Delay Lock Loop in the DRAM controller. The value depends on chipset and PCB layout. Ollie _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
