Hello from Gregg C Levine Pardon me Andrew? It happens that I got the thing to work. This was in 1.4.1 and under Linux, Slackware Linux 8.0 if you're curious. I simply plugged the file that you made into the space provided, and adjusted the rest of the settings to match. If you mean that the elf boot program that everyone is proud of, and rightfully so, does not work under Bochs, I'll agree. I tabled it, because I could not figure out a way to make it work. I figured correctly that I'd need to make a port to a particular motherboard to make it work for me. Oh, and what did you mean? Anyway. ------------------- Gregg C Levine [EMAIL PROTECTED] ------------------------------------------------------------ "The Force will be with you...Always." Obi-Wan Kenobi "Use the Force, Luke."� Obi-Wan Kenobi (This company dedicates this E-Mail to General Obi-Wan Kenobi ) (This company dedicates this E-Mail to Master Yoda )
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxbios- > [EMAIL PROTECTED]] On Behalf Of Andrew Kohlsmith > Sent: Wednesday, December 04, 2002 9:36 AM > To: [EMAIL PROTECTED] > Subject: Re: common flash hw write enable methods > > > It doesn't. Basically most flasher programs use some kind of data > > structure the look for in the bios memory, that contains pointers to > > functions like "map flash to memory", "disable write protection", etc. > > This is at least the case with AMI and Award, probably Phoenix as well. > > These are 16bit calls, which makes it kind of hard/impossible to really > > use directly. It's possible to search for this structure and look at > > the code. However, this is likely to be illegal in many countries. > > Not in Canada. :-) > > Yeah this does sound kind of ugly. Especially since the Orasis BIOS won't > boot up in Bochs, as it seems to end up hanging due to some PIT simulator > inconsistencies. > > > Especially after the first non-vendor-written flashers appeared, many > > people were scared of viruses destroying the flash data and such. > > Security by obscurity... > > Well, if worse comes to worst I can just cut the trace and wire those pins to > +12. The datasheet for the chip says that it operates normally under those > circumstances, except that all "soft" boot block protection is disabled. > > Regards, > Andrew > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
