Alternate solution: I've seen other boards where certain PCI addresses cause hangs. If you want to have full kernel PCI support, you might want to make a patch that lets you skip bad PCI addresses. i.e. some new kernel parameters like "badpci=foo,foo,...". In this case "badpci=0xa8".
This might be useful in the future. Kevin ---------- Original Message ---------------------------------- From: Andrew Ip <[EMAIL PROTECTED]> Date: Tue, 17 Dec 2002 10:41:05 +0800 > >> I've seen this problem, but ONLY on VIA north bridges derived from the >> 8601. Hence I still blame the chipset. >> So we can build a working EPIA at this point? >Basically yes. If you have the above problem, you probably need to change the >kernel to skip the pci probe. > >-Andrew > >-- >Andrew Ip >Email: [EMAIL PROTECTED] >Tel: (852) 2542 2046 >Fax: (852) 2542 2036 >Mobile: (852) 9201 9866 > >Cwlinux Limited >Unit 202B 2/F Lai Cheong Factory Building, >479-479A Castle Peak Road, >Lai Chi Kok, Kowloon, >Hong Kong. > >Tel: (852)2542 2046 >Fax: (852)2542 2036 > >For public pgp key, please obtain it from http://www.keyserver.net/en. > > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
