I have added some debug message which corrupted the values in some resgister. Now it is working fine.
Thanks, Siva Serial Output: -------------- LinuxBIOS-1.0.0 Thu Dec 26 18:54:44 IST 2002 starting... Ram1 Ram2 Ram3 Ram Enable 1 Ram Enable 2 Ram Enable 3 Ram Enable 4 Ram Enable 5 12345678123456781234567812345678--- SDRAM TEST PASSED Ram4 Ram5 Ram6 Copying LinuxBIOS to ram. LinuxBIOS-1.0.0 Thu Dec 26 18:54:44 IST 2002 booting... Finding PCI configuration type. PCI: Using configuration type 1 Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [8086/1a30] PCI: 00:01.0 [8086/1a31] PCI: 00:1e.0 [8086/244e] PCI: 00:1f.0 [8086/2440] PCI: 00:1f.1 [8086/244b] PCI: 00:1f.2 [8086/2442] PCI: 00:1f.3 [8086/2443] PCI: 00:1f.4 [8086/2444] PCI: 00:1f.5 [8086/2445] PCI: 00:1f.6 [8086/2446] PCI: pci_scan_bus for bus 1 PCI: 01:00.0 [10de/002d] PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus for bus 2 PCI: 02:05.0 [10ec/8139] PCI: pci_scan_bus returning with max=02 PCI: pci_scan_bus returning with max=02 done totalmem is 128 totalram: 128M Initializing CPU #0 Max cpuid index : 2 Vendor ID : GenuineIntel Processor Type : 0x00 Processor Family : 0x0f Processor Model : 0x01 Processor Mask : 0x00 Processor Stepping : 0x02 Feature flags : 0x3febfbff Cache/TLB descriptor values: 1 reads required Desc 0x50 : UNKNOWN Desc 0x5b : UNKNOWN Desc 0x66 : UNKNOWN Desc 0x00 : null Desc 0x00 : null Desc 0x00 : null Desc 0x00 : null Desc 0x00 : null Desc 0x00 : null Desc 0x00 : null Desc 0x00 : null Desc 0x40 : No L2 cache Desc 0x70 : UNKNOWN Desc 0x7a : UNKNOWN Desc 0x00 : null Configuring L2 cache...CPU signature of f10 so no L2 cache configuration Enable Cache done. Setting up local apic...done. CPU #0 Initialized Allocating PCI resources... ASSIGN RESOURCES, bus 0 PCI: 00:00.0 10 <- [0xe0000000 - 0xefffffff] prefmem PCI: 00:01.0 1c <- [0x00002000 - 0x00001fff] bus 1 .io PCI: 00:01.0 24 <- [0xf0000000 - 0xf1ffffff] bus 1 .prefmem PCI: 00:01.0 20 <- [0xf2000000 - 0xf2ffffff] bus 1 .mem ASSIGN RESOURCES, bus 1 PCI: 01:00.0 10 <- [0xf2000000 - 0xf2ffffff] mem PCI: 01:00.0 14 <- [0xf0000000 - 0xf1ffffff] prefmem PCI: 00:1e.0 1c <- [0x00001000 - 0x00001fff] bus 2 .io PCI: 00:1e.0 24 <- [0xf3100000 - 0xf30fffff] bus 2 .prefmem PCI: 00:1e.0 20 <- [0xf3000000 - 0xf30fffff] bus 2 .mem ASSIGN RESOURCES, bus 2 PCI: 02:05.0 10 <- [0x00001000 - 0x000010ff] io PCI: 02:05.0 14 <- [0xf3000000 - 0xf30000ff] mem PCI: 00:1f.1 20 <- [0x00002c00 - 0x00002c0f] io PCI: 00:1f.2 20 <- [0x000028c0 - 0x000028df] io PCI: 00:1f.3 20 <- [0x00002c10 - 0x00002c1f] io PCI: 00:1f.4 20 <- [0x000028e0 - 0x000028ff] io PCI: 00:1f.5 10 <- [0x00002000 - 0x000020ff] io PCI: 00:1f.5 14 <- [0x00002880 - 0x000028bf] io PCI: 00:1f.6 10 <- [0x00002400 - 0x000024ff] io PCI: 00:1f.6 14 <- [0x00002800 - 0x0000287f] io Allocating VGA resource done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 cmd <- 07 PCI: 00:1e.0 cmd <- 07 PCI: 00:1f.0 cmd <- 0f PCI: 00:1f.1 cmd <- 01 PCI: 00:1f.2 cmd <- 01 PCI: 00:1f.3 cmd <- 01 PCI: 00:1f.4 cmd <- 01 PCI: 00:1f.5 cmd <- 01 PCI: 00:1f.6 cmd <- 01 PCI: 01:00.0 cmd <- 03 PCI: 02:05.0 cmd <- 03 done. Initializing PCI devices... PCI devices initialized intel_mainboard_fixup() Reset Control Register port 92 Disable Nmi enabling smbus enable pm functions disabling smi Disable more pm stuff Set the subsystem vendor id On Fri, 2002-12-27 at 00:56, Ronald G. Minnich wrote: > On Thu, 26 Dec 2002, Stefan Reinauer wrote: > > > Almost looks like the baud rate is changed somewhen after Ram6. What > > baudrate are you using? > > > also on some of these superio if you just reload the baud register, even > with the same baudrate, it will send lots of garbage output. > > It could be that, which is harmless. > > ron -- sivakumar <[EMAIL PROTECTED]> wipro _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
