> All of my results like this were that RAM was not really there. It is > copying the C code to ram, which isn't there, and then jumping to garbage, > which on many mobos results in a reboot eventually.
Crap. :-( > Could be the ram is in the wrong slot. Did you try all RAM sockets? Some > bridge implementations in LinuxBios expect a particular socket (#1 if it is > numbered). There is only the one slot. This particular system would only accept EDO before, but it's a 430TX chipset which should work with either. I tried both EDO and SDRAM SODIMMs without success. Time to unsolder the part. I think I'm going to install a DIP socket and officially declare this particular motherboard my sacrificial system. :-) Regards, Andrew _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
