Hi guys, I currently use the /dev/bios work for flashing BIOS in a production evironment on a GX1+5530A platform. It works great. It may not work out of the box for SC2200/SC1200 (I have no experience on these platforms), but it would be well worth getting it working - it supports a large number of different flash parts and provides a great interface. Sounds like Adam has already done the hard bit!
James > -----Original Message----- > From: John Allen [mailto:[EMAIL PROTECTED]] > Sent: 02 January 2003 12:34 > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: Re: Help NS Geode experts > > > Adam, > I am also working on a board that integrates the Geode SC2200/SC1200 > chip. I am not sure if I can answer your questiuon, but I am > interrested in how you programed your flash. I was planning > on trying > the /dev/bios utility before I attemted to do it on my own. Have you > look at this utility? > http://www.freiburg.linux.de/OpenBIOS/development/devbios.html > John > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Imerge Limited Tel :- +44 (0)1954 783600 Unit 6 Bar Hill Business Park Fax :- +44 (0)1954 783601 Saxon Way Web :- http://www.imerge.co.uk Bar Hill Cambridge CB3 8SL United Kingdom ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
