On Sat, 25 Jan 2003 23:55:56 -0700 (MST), Ronald G. Minnich wrote: > richard, here is a known-good config file for the digital logic > smartcore-p3, a known-good platform. Just try building with this and see > how the errors work out :-) >
Not good... I get nothing. It built though so I guess thats a step up. > Also what mainboard are you using? The Bitworks IMS board. Its a custom board we designed. Looks really close to the Intel reference design for the 440bx. We are using a NSC pc87351 for the superio. I added that into the p3 config instead of the SMC but no luck. With out SERIAL_POST=1 my config generates output but the ramtest fails. So I'm going to start looking at the differences between the p3 and my IMS config. Perhaps something will show up. -- Richard A. Smith Bitworks, Inc. [EMAIL PROTECTED] 479.846.5777 x104 Sr. Design Engineer http://www.bitworks.com _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
